适用于2.4 GHz IEEE 802.15.4 / RF4CE / ZigBee 40-VQFN的第二代片上系统解决方案-40至125
PDF, 1.2 Mb, 档案已发布: Aug 10, 2011
CC2530, CC2540, CC8520 AN104 -- TDK Corporation balun optimized for CC253x
PDF, 877 Kb, 档案已发布: Sep 28, 2012
PDF, 3.8 Mb, 档案已发布: Jan 10, 2014
CC2530 Developing a ZigBee System Using CC2530-ZNP Approach
PDF, 227 Kb, 档案已发布: Dec 12, 2011
Z-Stack Duty Cycle Analysis
PDF, 217 Kb, 档案已发布: May 20, 2009
PDF, 2.1 Mb, 档案已发布: Oct 17, 2013
This application report describes the expected performance of the CC2530 and the SE2431L module. The combined CC2530 and SE2431L solution is suitable for systems targeting compliance with FCC CFR47 Part 15.The RF front end of CC2530 has the same settings as the ones being used in CC2531. Therefore, the presented results are also valid for CC2531.
PDF, 541 Kb, 修订版: A, 档案已发布: Jul 29, 2015
This application report describes the pairing of the cost-effective SimpleLinkв„ў ZigBee CC2530 wireless MCU with the SimpleLink CC2592 range extender to improve the receiver sensitivity and increase the total link budget, enabling up to four times the range of each node in the ZigBee network. The combination of these devices creates a system solution that is ideal for applications such as hom
PDF, 58 Kb, 修订版: A, 档案已发布: Jul 12, 2009
PDF, 800 Kb, 修订版: C, 档案已发布: Mar 12, 2013
PDF, 117 Kb, 档案已发布: Apr 29, 2009
PDF, 836 Kb, 档案已发布: Nov 18, 2011
PDF, 742 Kb, 档案已发布: Oct 1, 2014
Low Power Wireless Radio as a technology is of great application to many of the products where wireless connectivity is needed. But the world of RF is completely different from the conventional development environment perspective, as the frequencies involved make the testing of such systems more complex. Texas Instruments has a huge portfolio of Low Power Wireless Simple Link solutions catering th
PDF, 451 Kb, 档案已发布: Jul 28, 2011
PDF, 216 Kb, 档案已发布: Nov 9, 2009
This application note describes how to modify the TI-MAC (v1.3.0) / Z-Stack (v2.2.0) software releases for the CC2530 SoC to support CC2591 PA/LNA controls.
PDF, 327 Kb, 修订版: A, 档案已发布: Dec 16, 2009
This application note is targeted designers of RF systems with CC2530/CC2531 and the CC2591 RF Power Amplifier (PA). It describes how to implement the CC2530 and the CC2591 in the same design. It further describes the expected performance from this combination as well as important factors to consider with respect to the layout and regulatory requirements. The combined CC2530 and CC2591 soluti
PDF, 828 Kb, 修订版: B, 档案已发布: Dec 16, 2014
As consumers become accustomed to elegant touch interfaces on a variety of devices, these capabilities are becoming more expected on a greater number of devices. The CC253x devices used in RF4CE applications provide hardware support for Capacitive Touch Sensing (Capacitive Sensing),
PDF, 584 Kb, 修订版: A, 档案已发布: Aug 18, 2009
AN060 - Security on TI IEEE 802.15.4 Compliant RF DevicesThis application note introduces IEEE 802.15.4 security and gives practical examples using Texas Instruments’ family of IEEE 802.15.4 compliant RF chipsets; the CC2420, CC2430, CC2520 andCC2530. The main focus will be on the CC2520, TI’s second-generation IEEE 802.15.4 compliant RF transceiver. This document will also explain how to impl
PDF, 110 Kb, 修订版: C, 档案已发布: Nov 26, 2013
RF systems are highly dependent on accurate clocks for correct operation. A deviation in clock frequency is directly reflected as a deviation in radio frequency. This can degrade RF performance, violate legal requirements or in worst case lead to a non-functioning system. The scope of this application report is to give the design engineer a quick guide on how to design, tune and verify the
PDF, 733 Kb, 档案已发布: Jan 24, 2013
PDF, 426 Kb, 档案已发布: Sep 5, 2012
Application note AN118 demonstrates how to use the CC debug interface to perform various flash related tasks on CC253x / CC254x System-on-Chips. It is distributed along with a example code using a CC2530 as a programmer – but is easily ported to other devices. The application note explains in detail the example code, which covers how to enter debug mode and how to read/write/erase the flash memory
PDF, 805 Kb, 修订版: A, 档案已发布: Oct 26, 2011
PDF, 211 Kb, 档案已发布: Aug 3, 2009
PDF, 133 Kb, 修订版: A, 档案已发布: Aug 11, 2009
The purpose of this design note is to describe how to operate the two USARTs in synchronous SPI mode, both as a master and as a slave.
PDF, 605 Kb, 档案已发布: Sep 22, 2009
PDF, 210 Kb, 修订版: B, 档案已发布: Aug 11, 2009
This design note describes the key elements and simple usage of the CC111xFx/CC243xFx/CC251xFx/CC253xFx USART peripheral in UART mode. The main objective is to explain the CC111xFx/CC243xFx/CC251xFx/CC253xFx software required to operate the UART, with and without DMA support.
PDF, 456 Kb, 修订版: B, 档案已发布: Nov 6, 2012
PDF, 596 Kb, 档案已发布: Aug 8, 2011
This document presents users of Texas Instruments' low-power RF products with an overview of the different characterization tests (conducted, not radiated) that are performed during the device verification process. The document covers the basic setup of the test system and gives procedural information about each test.
PDF, 2.4 Mb, 档案已发布: Feb 8, 2017
This application report describes the setup and procedure used to measure the new ETSI EN receiver (RX) blocking test added to version v2.1.1 of the ETSI EN 300 328 harmonized standard.
PDF, 456 Kb, 修订版: A, 档案已发布: Aug 2, 2012
PDF, 1.9 Mb, 档案已发布: Oct 14, 2010
PDF, 126 Kb, 修订版: T, 档案已发布: Oct 12, 2011
PDF, 2.3 Mb, 档案已发布: Aug 26, 2010
DN031 -- Design Notes
PDF, 1.8 Mb, 修订版: B, 档案已发布: Oct 6, 2010
PDF, 138 Kb, 修订版: A, 档案已发布: Feb 12, 2013