Datasheet Texas Instruments UCC27222PWPR — 数据表

制造商Texas Instruments
系列UCC27222
零件号UCC27222PWPR
Datasheet Texas Instruments UCC27222PWPR

高效预测同步降压驱动器14-HTSSOP -40至105

数据表

High-Efficiency Predictive Synchronous Buck Driver datasheet
PDF, 1.7 Mb, 修订版: B, 档案已发布: Jul 16, 2003
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin14
Package TypePWP
Industry STD TermHTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device Marking27222
Width (mm)4.4
Length (mm)5
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical Data下载

参数化

Bus Voltage30 V
Channel Input LogicTTL
Fall Time17 ns
Input ThresholdTTL
Input VCC(Max)20 V
Input VCC(Min)5 V
Negative Voltage Handling at HS Pin-0.3 V
Number of Channels2
Operating Temperature Range-40 to 105 C
Package GroupHTSSOP
Peak Output Current3 A
Power SwitchMOSFET
Prop Delay60 ns
RatingCatalog
Rise Time17 ns
Special FeaturesDead Time Control,Soft Switching,Synchronous Rectification

生态计划

RoHSCompliant

应用须知

  • Increasing UCC27221/2 Gate Drive Voltage
    PDF, 85 Kb, 档案已发布: Jun 20, 2003
    The UCC2722x contains an internal 6.5-V regulator, from which the gate drive voltages for the high and low-side MOSFETs of a synchronous buck power stage are derived. In some instances it may be desirable to drive the MOSFET gates with a voltage other than 6.5 V. The output driver stage of the UCC2722x has an absolute maximum voltage rating of 10 V. However it is still possible to bypass the inter
  • Low Voltage Feedback in PWM Applications
    PDF, 56 Kb, 档案已发布: Feb 27, 2003
    Normally the output voltage of a switching power supply is higher than the error amplifier reference, and so a simple resistive divider between the output voltage and ground at the non-inverting input of the PWM error amplifier is all that is required to set the regulation voltage. However, when the output voltage is less than the error amplifier reference voltage, the feedback voltage must be div
  • Predictive Gate Drive (tm) FAQ
    PDF, 152 Kb, 档案已发布: Feb 3, 2003
    The proprietary Predictive Gate Driveв„ўtechnology from Texas Instruments maximizes efficiencies of today's high frequency, low output voltage, synchronous buck converters. To gain a better understanding of this innovative new control technique, this list of frequently asked questions (FAQs) addresses the Predictive Gate Driveв„ў technique.
  • Predictive Gate Drive Boosts Converter Efficiency
    PDF, 376 Kb, 档案已发布: Dec 18, 2002
    Predictive Gate Driveв„ў is a novel digital control-driven technique that optimizes MOSFET turn-on and turn-off delays in synchronous rectifiers. It uses a closed loop feedback system to detect body-diode conduction, and continuously adjusts dead-time delays to minimize the conduction time interval. Depending upon operating frequency and output voltage, the Predictive Gate Driveв„ў control
  • UCC27221/2 Predictive Gate Drive FAQ
    PDF, 211 Kb, 档案已发布: Dec 18, 2002
    The UCC27221/2 High-Efficiency Predictive Synchronous Buck Driver from Texas Instruments, employs the proprietary Predictive Gate Driveв„ў technology to maximize efficiencies of today's high frequency, low output voltage, synchronous buck converters. To gain a better understanding of this innovative new control technique, a list of frequently asked questions (FAQs) has been developed to addres

模型线

系列: UCC27222 (3)

制造商分类

  • Semiconductors > Power Management > MOSFET and IGBT Gate Drivers > Half-bridge Driver