Datasheet Texas Instruments LP2981-29DBVT — 数据表
| 制造商 | Texas Instruments |
| 系列 | LP2981 |
| 零件号 | LP2981-29DBVT |
具有关断功能的100mA超低压降稳压器，容差1.25％5-SOT-23 -40至125
数据表
LP2981 100-mA Ultra-Low Dropout Regulators With Shutdown datasheet
PDF, 1.1 Mb, 修订版: G, 档案已发布: Aug 31, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 5 | 5 |
| Package Type | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | LP3L | LP3G |
| Width (mm) | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 |
| Mechanical Data | 下载 | 下载 |
参数化
| Accuracy | 6 % |
| Fixed Output Options | 2.8,2.9,3,3.3,5 V |
| Iout(Max) | 0.1 A |
| Iq(Typ) | 0.065 mA |
| Noise | 160 uVrms |
| Operating Temperature Range | -40 to 125 C |
| Output Capacitor Type | Non-Ceramic |
| Output Options | Fixed Output |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable |
| Thermal Resistance ОёJA | 205 В°C/W |
| Vdo(Typ) | 200 mV |
| Vin(Max) | 16 V |
| Vin(Min) | 2.2 V |
| Vout(Max) | 5 V |
| Vout(Min) | 2.8 V |
生态计划
| RoHS | Compliant |
应用须知
- A Topical Index of TI LDO Application Notes (Rev. F)PDF, 82 Kb, 修订版: F, 档案已发布: Jun 27, 2019
- Techniques for accurate PSRR measurementsPDF, 1.9 Mb, 档案已发布: Oct 28, 2013
- Fundamental Theory of PMOS LDO Voltage RegulatorsPDF, 66 Kb, 档案已发布: May 7, 1999
This report presents a fundamental understanding on the theory of low-dropout voltage regulators using a PMOS FET as the pass element to adjust the output current to the load requirements. - Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)PDF, 509 Kb, 修订版: A, 档案已发布: Jun 4, 2008
- A Topical Index of TI Supply Voltage Supervisor (SVS) Application NotesPDF, 56 Kb, 档案已发布: Jun 15, 2015
- 3.6V - 5.5V Input LDO Reference Design for MSP430 (Rev. A)PDF, 110 Kb, 修订版: A, 档案已发布: Jun 14, 2010
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design but may not be as concerned about maintaining the highest possible efficiency or longest battery life. - Linear and Switching Voltage Regulator Fundamental Part 1PDF, 183 Kb, 档案已发布: Mar 21, 2007
- Low Power 150-mA LDO Linear Regulators. Extended Output Voltage Adjustment RangePDF, 41 Kb, 档案已发布: Jun 11, 1999
The TPS76301 low-dropout (LDO) adjustable linear regulator generates a regulated 1-V output from an input voltage ranging from 3 V to 6 V. The application circuit is based on the application detailed in the TPS76301 data sheet (TI Literature number SLVS181A Figure 21) except for the auxiliary circuit which is shown here in Figure 1. - LDO Noise Demystified (Rev. A)PDF, 785 Kb, 修订版: A, 档案已发布: Aug 9, 2017
Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced. - ESR Stability and the LDO RegulatorPDF, 83 Kb, 档案已发布: May 7, 2002
Choosing an output capacitor for LDO regulators with PNP or PMOS pass element can be difficult to specific ESR requirements. This application note explains why higher ESR capacitors are necessary how to chose them and how to determine whether or not the regulator is stable. - AN-1950 Silently Powering Low Noise Applications (Rev. A)PDF, 10.5 Mb, 修订版: A, 档案已发布: Apr 22, 2013
This application report explains how to implement a low noise switch mode power supply solution. Itintroduces the sources of noise and explain how to minimize them. A big factor in noise generation andpropagation is the printed circuit board layout. Important basics are discussed. Circuit measurementtechniques are also explained to guide a design engineer towards a low noise but efficient so - Extending the Input Voltage Range of an LDO RegulatorPDF, 32 Kb, 档案已发布: Aug 16, 2002
This application report explains how to use a FET to overcome the input voltage limitation of a linear regulator. - 3.6V - 5.5V Input LDO with Dual-Level Output Reference Design for MSP430 (Rev. A)PDF, 199 Kb, 修订版: A, 档案已发布: Jun 14, 2010
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design with extended battery life by putting the MSP430 into a low-power state between operating states. - Understanding the Terms and Definitions of LDO Voltage RegulatorsPDF, 197 Kb, 档案已发布: Oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab - Simple Power Solution Using LDOs for the DM365 (Rev. A)PDF, 104 Kb, 修订版: A, 档案已发布: Sep 11, 2009
- AN-1028 Maximum Power Enhancement Techniques for Power Packages (Rev. B)PDF, 684 Kb, 修订版: B, 档案已发布: May 6, 2013
The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example. - Ceramic Capacitors Replace Tantalum Capacitors in LDOs (Rev. A)PDF, 44 Kb, 修订版: A, 档案已发布: Oct 13, 2006
With the proper considerations ceramic output capacitors can be used with low dropout regulators (LDO) and DC/DC switching converters that require tantulum output capacitors. - Understanding LDO DropoutPDF, 52 Kb, 档案已发布: May 9, 2005
Not all low dropout (LDO) linear regulator data sheets provide the voltage dropout information needed for all applications. This application report shows a designer how to use an LDO data sheet's specified dropout performance to determine the dropout voltage at other operating conditions. - Technical Review of Low Dropout Voltage Regulator Operation And PerformancePDF, 284 Kb, 档案已发布: Aug 30, 1999
This application report provides a technical review of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current and topologies. The report also includes detailed discussions of load/line regulation efficiency frequency response range of stable ESR and accuracy of LDO voltage regulators. - AN-1482 LDO Regulator Stability Using Ceramic Output Capacitors (Rev. A)PDF, 169 Kb, 修订版: A, 档案已发布: Apr 25, 2013
Ultra-low ESR capacitors such as ceramics are highly desirable because they can support fast-changingload transients and also bypass very high frequency noise coming from switching converter powersources which a linear regulator can not reject. However using ultra-low ESR capacitors on the output ofan LDO regulator requires that specific design changes be implemented to ensure loop stabili - LDO PSRR Measurement Simplified (Rev. A)PDF, 131 Kb, 修订版: A, 档案已发布: Aug 9, 2017
This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods - AN-1815 LDOs Ease the Stress of Start-Up (Rev. A)PDF, 81 Kb, 修订版: A, 档案已发布: Apr 24, 2013
The LP38851/52/53 devices with soft-start provide a reliable way to ensure that start-up into highcapacitive loads is uneventful and stress free. - LDO Performance Near DropoutPDF, 149 Kb, 档案已发布: Oct 8, 2010
- Packaging Limits Range of Linear RegulatorsPDF, 75 Kb, 档案已发布: May 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
模型线
系列: LP2981 (14)
制造商分类
- Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO
其他名称:
LP298129DBVT, LP2981 29DBVT