Datasheet Texas Instruments UC3853D — 数据表

制造商	Texas Instruments
系列	UC3853
零件号	UC3853D

高功率因数预调节器8-SOIC 0至70

数据表

下载

PDF, 395 Kb, 档案已发布: Sep 5, 1999

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

打包

Pin	8
Package Type	D
Industry STD Term	SOIC
JEDEC Code	R-PDSO-G
Package QTY	75
Carrier	TUBE
Device Marking	UC3853D
Width (mm)	3.91
Length (mm)	4.9
Thickness (mm)	1.58
Pitch (mm)	1.27
Max Height (mm)	1.75
Mechanical Data	下载

参数化

Control Method	CCM
Device Type	Single-phase PFC
Operating Supply Current	10 mA
Operating Supply(Max)	40 V
Operating Temperature Range	0 to 70 C
Package Group	SOIC
Package Size: mm2:W x L	8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Peak Output Sink Current Gate Drive	1 A
Peak Output Source Current Gate Drive	-1 A
Practical Operating Frequency(Max)	0.115 MHz
Rating	Catalog
Special Features	Average Current Mode,OVP
Startup Current	0.25 mA
UVLO Thresholds On/Off	11.5/9.5 V

生态计划

RoHS

Compliant

应用须知

下载
DN-77 Overcurrent Shutdown with the UC3853
PDF, 44 Kb, 档案已发布: Sep 5, 1999
Boost converters are susceptible to large inrush currents at startup and with step changes in VLINE, because the output capacitor is connected directly to the input through the boost diode. This design note describes and provides a schematic for a circuit that provides overcurrent shutdown using the UC3853 High Power-Factor Preregulator. The UC3853 provides simple yet high-performance active power
下载
DN-78 UC3853 Demo Board
PDF, 204 Kb, 档案已发布: Sep 5, 1999
This design note describes a demo board for the UC3853 8-pin, High Power-Factor Preregulator Integrated Circuit. This demo board was designed for 100W, 75kHz operation over a universal input-voltage range (80VAC to 270VAC). A parts list and schematic diagram for the typical application circuit are included in this design note.
下载
U-159 Boost Power Factor Corrector Design with the UC3853
PDF, 466 Kb, 档案已发布: Sep 5, 1999
The UC3853 provides high-performance power-factor correction (PFC) for low- to medium-power applications with minimal complexity. It provides power supplies in the range of 10-200W with a low-distortion, power-factor-corrected input current, a regulated output voltage, and operation over a wide range of input voltages. The UC3853 uses average current mode control and works with either a boost or f
下载
AC Requirements for Power Factor Correction Circuits
PDF, 29 Kb, 档案已发布: Mar 28, 2002
This technical brief identifies the recommended range of IAC for each of the devices within the UCC3854 family of PFC controllers.

模型线

系列: UC3853 (5)

UC3853D UC3853DG4 UC3853DTR UC3853N UC3853NG4

制造商分类

Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction