Datasheet Texas Instruments OPA2357AIDGSTG4 — 数据表

制造商Texas Instruments
系列OPA2357
零件号OPA2357AIDGSTG4
Datasheet Texas Instruments OPA2357AIDGSTG4

250MHz,轨到轨I / O,双CMOS运算放大器,带停机10-VSSOP -40至125

数据表

250MHz, Rail-to-Rail I/O, CMOS Operational Amplifiers w/ Shutdown datasheet
PDF, 1.0 Mb, 修订版: E, 档案已发布: May 12, 2009
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin10
Package TypeDGS
Industry STD TermVSSOP
JEDEC CodeS-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingBBG
Width (mm)3
Length (mm)3
Thickness (mm)1.02
Pitch (mm).5
Max Height (mm)1.07
Mechanical Data下载

参数化

2nd Harmonic75 dBc
3rd Harmonic83 dBc
@ MHz1
Acl, min spec gain1 V/V
Additional FeaturesShutdown
ArchitectureCMOS,Voltage FB
BW @ Acl250 MHz
CMRR(Min)56 dB
CMRR(Typ)68 dB
GBW(Typ)250 MHz
Input Bias Current(Max)50 pA
Iq per channel(Max)6 mA
Iq per channel(Typ)4.9 mA
Number of Channels2
Offset Drift(Typ)4 uV/C
Operating Temperature Range-40 to 125 C
Output Current(Typ)100 mA
Package GroupVSSOP
Package Size: mm2:W x L10VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG
Rail-to-RailIn,Out
RatingCatalog
Slew Rate(Typ)150 V/us
Total Supply Voltage(Max)5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)6.5 nV/rtHz
Vn at Flatband(Typ)6.5 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)8 mV

生态计划

RoHSCompliant

应用须知

  • Design of Analog Interface for Ultrasonic Gas Flow Meter Sensors (Rev. A)
    PDF, 2.0 Mb, 修订版: A, 档案已发布: Mar 27, 2016
    Transit-time ultrasonic gas flow meters have gained acceptance in applications for gas transferdistribution. Advantages of this technology include: wide measuring range, relatively high accuracy, goodrepeatability, negligible pressure drop, general insensitivity to liquid contaminants, insensitivity tofluctuations of the gas composition, and low maintenance.This application note covers t
  • OPA357, OPA2357 EMI Immunity Performance (Rev. A)
    PDF, 90 Kb, 修订版: A, 档案已发布: Nov 2, 2012
  • Tuning in Amplifiers
    PDF, 44 Kb, 档案已发布: Oct 2, 2000
    Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil
  • Single-Supply Operation of Operational Amplifiers
    PDF, 77 Kb, 档案已发布: Oct 2, 2000
    Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation.
  • Op Amp Performance Analysis
    PDF, 76 Kb, 档案已发布: Oct 2, 2000
    This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)