Datasheet Texas Instruments LM6211MF/NOPB — 数据表

LM6211
www.ti.com SNOSAH2C – FEBRUARY 2006 – REVISED MARCH 2013 LM6211 Low Noise, RRO Operational Amplifier with CMOS Input and 24V Operation
Check for Samples: LM6211 FEATURES 1 (Typical 24V Supply Unless Otherwise Noted) 2 Supply Voltage Range 5V to 24V
Input Referred Voltage Noise 5.5 nV/в€љHz
Unity Gain Bandwidth 20 MHz
1/f Corner Frequency 400 Hz
Slew Rate 5.6 V/Ојs
Supply Current 1.05 mA
Low Input Capacitance 5.5 pF Temperature Range -40В°C to 125В°C
Total Harmonic Distortion 0.01% @ 1 kHz,
600Ω
Output Short Circuit Current 25 mA APPLICATIONS PLL Loop Filters
Low Noise Active Filters
Strain Gauge Amplifiers
Low Noise Microphone Amplifiers DESCRIPTION
The LM6211 is a wide bandwidth, low noise op amp with a wide supply voltage range and a low input bias
current. The LM6211 operates with a single supply voltage of 5V to 24V, is unity gain stable, has a groundsensing CMOS input stage, and offers rail-to-rail output swing.
The LM6211 is designed to provide optimal performance in high voltage, low noise systems. The LM6211 has a
unity gain bandwidth of 20 MHz and an input referred voltage noise density of 5.5 nV/в€љHz at 10 kHz. The
LM6211 achieves these specifications with a low supply current of only 1 mA. The LM6211 has a low input bias
current of 2.3 pA, an output short circuit current of 25 mA and a slew rate of 5.6 V/us. The LM6211 also features
a low common-mode input capacitance of 5.5 pF which makes it ideal for use in wide bandwidth and high gain
circuits. The LM6211 is well suited for low noise applications that require an op amp with very low input bias …