Datasheet Texas Instruments THS6032IDWP — 数据表
| 制造商 | Texas Instruments |
| 系列 | THS6032 |
| 零件号 | THS6032IDWP |
低功耗ADSL中心局线路驱动器20-SO PowerPAD -40至85
数据表
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 20 |
| Package Type | DWP |
| Industry STD Term | HSOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 25 |
| Carrier | TUBE |
| Device Marking | THS6032I |
| Width (mm) | 7.52 |
| Length (mm) | 12.82 |
| Thickness (mm) | 2.55 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 2.65 |
| Mechanical Data | 下载 |
参数化
| 2nd Harmonic | 79 dBc |
| 3rd Harmonic | 68 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Current FB |
| BW @ Acl | 100 MHz |
| CMRR(Min) | 64 dB |
| CMRR(Typ) | 72 dB |
| GBW(Typ) | 100 MHz |
| Input Bias Current(Max) | 9000000 pA |
| Iq per channel(Max) | 10.8 mA |
| Iq per channel(Typ) | 8.3 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 440 mA |
| Package Group | SO PowerPAD |
| Package Size: mm2:W x L | 20SO PowerPAD: 133 mm2: 10.405 x 12.825(SO PowerPAD) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 1200 V/us |
| Total Supply Voltage(Max) | 32 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 2.8 nV/rtHz |
| Vn at Flatband(Typ) | 2.4 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
生态计划
| RoHS | Compliant |
应用须知
- Active Output Impedance for ADSL Line DriversPDF, 636 Kb, 档案已发布: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
模型线
系列: THS6032 (5)
- THS6032CDWP THS6032IDWP THS6032IDWPR THS6032IGQER THS6032IVFPG4
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)