Datasheet Texas Instruments LPC660AIM/NOPB — 数据表

LPC660
www.ti.com SNOS554D – MAY 1998 – REVISED MARCH 2013 LPC660 Low Power CMOS Quad Operational Amplifier
Check for Samples: LPC660 FEATURES DESCRIPTION The LPC660 CMOS Quad operational amplifier is
ideal for operation from a single supply. It features a
wide range of operating voltages from +5V to +15V
and features rail-to-rail output swing in addition to an
input common-mode range that includes ground.
Performance limitations that have plagued CMOS
amplifiers in the past are not a problem with this
design. Input VOS, drift, and broadband noise as well
as voltage gain (into 100 kО© and 5 kО©) are all equal
to or better than widely accepted bipolar equivalents,
while the power supply requirement is typically less
than 1 mW. 1 2 Rail-to-rail output swing
Micropower operation: (1 mW)
Specified for 100 kО© and 5 kО© loads
High voltage gain: 120 dB
Low input offset voltage: 3 mV
Low offset voltage drift: 1.3 ОјV/В°C
Ultra low input bias current: 2 fA
Input common-mode includes V-Operation range from +5V to +15V
Low distortion: 0.01% at 1 kHz
Slew rate: 0.11 V/Ојs …