Datasheet Texas Instruments THS3121CDR — 数据表
制造商 | Texas Instruments |
系列 | THS3121 |
零件号 | THS3121CDR |
单路低噪声,高输出驱动,475mA电流反馈放大器8-SOIC -40至85
数据表
Low-Noise, High-Output Drive, Current Feedback Operational Amplifiers datasheet
PDF, 1.3 Mb, 修订版: E, 档案已发布: Oct 12, 2009
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 8 |
Package Type | D |
Industry STD Term | SOIC |
JEDEC Code | R-PDSO-G |
Package QTY | 2500 |
Carrier | LARGE T&R |
Device Marking | 3121C |
Width (mm) | 3.91 |
Length (mm) | 4.9 |
Thickness (mm) | 1.58 |
Pitch (mm) | 1.27 |
Max Height (mm) | 1.75 |
Mechanical Data | 下载 |
参数化
2nd Harmonic(dBc) | 51 |
3rd Harmonic(dBc) | 50 |
@ MHz | 10 |
Acl, min spec gain(V/V) | 1 |
Additional Features | N/A |
Approx. Price (US$) | 2.48 | 1ku |
Architecture | Bipolar Current FB |
BW @ Acl(MHz) | 130 |
CMRR(Min)(dB) | 63 |
CMRR(Typ)(dB) | 70 |
GBW(Typ)(MHz) | 130 |
Input Bias Current(Max)(pA) | 4000000 |
Iq per channel(Max)(mA) | 4.25 |
Iq per channel(Typ)(mA) | 3.5 |
Number of Channels(#) | 1 |
Offset Drift(Typ)(uV/C) | 10 |
Operating Temperature Range(C) | -40 to 85 |
Output Current(Typ)(mA) | 475 |
Package Group | SOIC |
Package Size: mm2:W x L (PKG) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ)(V/us) | 1500 |
Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 30 |
Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 10 |
Vn at Flatband(Typ)(nV/rtHz) | 2.5 |
Vos (Offset Voltage @ 25C)(Max)(mV) | 10 |
生态计划
RoHS | Compliant |
Pb Free | Yes |
设计套件和评估模块
- Evaluation Modules & Boards: THS3111EVM
THS3111 Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: THS3120EVM
THS3120 Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: THS3110EVM
THS3110 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Active filters using current-feedback amplifiersPDF, 227 Kb, 档案已发布: Feb 25, 2005
- Expanding the usability of current-feedback amplifiersPDF, 215 Kb, 档案已发布: Feb 28, 2005
- Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, 档案已发布: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
模型线
系列: THS3121 (6)
- THS3121CD THS3121CDR THS3121ID THS3121IDG4 THS3121IDGN THS3121IDGNG4
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)