Datasheet Texas Instruments TPS61089RNRT — 数据表
| 制造商 | Texas Instruments |
| 系列 | TPS61089 |
| 零件号 | TPS61089RNRT |
采用2.0mm x 2.5mm VQFN封装的12.6V，7A全集成同步升压转换器11-VQFN-HR -40至85
数据表
TPS61089x 12.6-V, 7-A Fully-Integrated Synchronous Boost Converters in 2.0-mm x 2.5-mm VQFN Package datasheet
PDF, 1.4 Mb, 修订版: B, 档案已发布: Jul 27, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 11 |
| Package Type | RNR |
| Industry STD Term | VQFN-HR |
| JEDEC Code | R-PQFP-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | ZGOI |
| Width (mm) | 2 |
| Length (mm) | 2.5 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | 下载 |
参数化
| Duty Cycle(Max) | 90 % |
| Iq(Typ) | 0.01 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VQFN-HR |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Adjustable Current Limit,Enable,Light Load Efficiency,Synchronous Rectification |
| Switch Current Limit(Min) | 10.6 A |
| Switch Current Limit(Typ) | 11.4 A |
| Switching Frequency(Max) | 2200 kHz |
| Switching Frequency(Min) | 200 kHz |
| Type | Converter |
| Vin(Max) | 12 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 12.6 V |
| Vout(Min) | 4.5 V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: TPS61089EVM-742
Boost Converter Evaluation Module for TPS61089
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Reducing Radiated EMI in TPS61088 Boost ConverterPDF, 1.4 Mb, 档案已发布: Jul 22, 2016
- Output Short-Circuit Protection Solution for the TPS61088PDF, 409 Kb, 档案已发布: Sep 22, 2016
- Five Steps to a Good PCB Layout of the Boost ConverterPDF, 701 Kb, 档案已发布: May 3, 2016
- AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C)PDF, 568 Kb, 修订版: C, 档案已发布: Apr 23, 2013
This application report provides an in-depth discussion of thermal design. - Minimizing Ringing at the Switch Node of a Boost ConverterPDF, 201 Kb, 档案已发布: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter. - Design considerations for a resistive feedback divider in a DC/DC converterPDF, 393 Kb, 档案已发布: Apr 26, 2012
- Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, 修订版: C, 档案已发布: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed. - PowerPAD Thermally Enhanced Package (Rev. H)PDF, 983 Kb, 修订版: H, 档案已发布: Jul 6, 2018
- QFN and SON PCB Attachment (Rev. B)PDF, 821 Kb, 修订版: B, 档案已发布: Aug 24, 2018
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, 档案已发布: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
模型线
系列: TPS61089 (2)
- TPS61089RNRR TPS61089RNRT
制造商分类
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)