Datasheet Texas Instruments TPS61165DRVRG4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | TPS61165 |
| 零件号 | TPS61165DRVRG4 |
采用2mm x 2mm QFN封装的高亮度白光LED驱动器6-WSON -40至85
数据表
TPS61165 High-Brightness, White LED Driver in WSON and SOT-23 Packages datasheet
PDF, 1.2 Mb, 修订版: D, 档案已发布: Apr 11, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 6 |
| Package Type | DRV |
| Industry STD Term | WSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | CCQ |
| Width (mm) | 2 |
| Length (mm) | 2 |
| Thickness (mm) | .75 |
| Pitch (mm) | .65 |
| Max Height (mm) | .8 |
| Mechanical Data | 下载 |
参数化
| Number of Channels | 1 |
| Duty Cycle(Max) | 93 % |
| LED | 27 |
| LED Current Per Channel | 400 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | WSON |
| Package Size: mm2:W x L | See datasheet (WSON) PKG |
| Peak Efficiency | 90 % |
| Rating | Catalog |
| Shutdown Current(Typ) | 1 uA |
| Special Features | EasyScale 1-Wire Interface,Load Disconnect During Shutdown |
| Switching Frequency(Max) | 1200 kHz |
| Topology | Boost |
| Type | Inductive |
| Vin(Max) | 18 V |
| Vin(Min) | 3 V |
| Vout(Max) | 38 V |
| Vout(Min) | 3 V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: TPS61165EVM-283
TPS61165EVM-283 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Compensating and measuring the DC/DC converter loop that powers a high-power LEDPDF, 618 Kb, 档案已发布: Oct 22, 2008
- Simple Backlight Driver Dimming PerformancePDF, 74 Kb, 档案已发布: Mar 20, 2017
The TPS61158, TPS61160/61, TPS61162/63A, TPS61165, and TPS61169 (hereafter TPS611xx) are simple backlight drivers commonly used in smartphones and tablets. These devices support PWM dimming with an input voltage as low as 2.7 V. This application note discusses the requirements for using tje TPS611xx parts at the lowest performance specifications for PWM dimming. - How to Use Analog Dimming With TPS6116xPDF, 162 Kb, 档案已发布: Aug 5, 2011
The TPS6116x family of devices are simple, white LED drivers that can drive up to 10 LEDs in series. The CTRL pin on these devices is the input for the integrated analog dimming circuitry but can only be used for PWM signals switching higher than 5 kHz. This application report shows a simple, external circuit that can be used to perform analog dimming from PWM signals that are below 5 kHz as well - TPS6116x With Separate Power Stage and IC Input VoltagesPDF, 194 Kb, 档案已发布: Apr 2, 2009
This application report shows how to operate the TPS6116x integrated circuits (IC) with two separate input power rails, one for the boost power stage and one to power the IC itself. In this example, an input as low as 1.8 V from discharged dual-alkaline batteries supplies power to the boost stage, whereas a separate 3.3-V supply powers the IC. - Extending the Input Voltage Range of the TPS6116x/8x/9x WLED DriversPDF, 124 Kb, 档案已发布: Aug 12, 2009
The TPS6116x, TPS6118x and TPS6119x WLED driver and TPS6117x boost converter integrated circuits (IC) can operate with different input voltages, one powering the IC itself and the other powering the boost power stage. This application report explains various options on how to use the WLED drivers with split power rails. This allows these LED drivers to be used in applications where the available - Analog PWM Dimming in White-LED DriversPDF, 539 Kb, 档案已发布: Dec 21, 2016
Pulse-width modulation (PWM) is a common type of dimming used to adjust the current in white-LEDdriver devices. PWM dimming takes a rectangle waveform with variable positive duty cycle (D) and adjuststhe LED current proportionally. For many smaller format white LED drivers (7-inch screen size or smaller),the PWM signal is converted to a DC control voltage and made to drive the LED current in - Designing Low Cost Flyback Power Supply Using Boost Converter (TPS61165) for HFPDF, 4.2 Mb, 档案已发布: Apr 17, 2014
TPS61165, LMR14206, TPS5401, AMC1100, TLV1117I-33, TLV1117I-50 Designing low cost flyback supply using boost converter for HF Inverter - Q4 2008 Issue Analog Applications JournalPDF, 1.5 Mb, 档案已发布: Oct 22, 2008
- Schottky Diode Selection in Asynchronous Boost ConvertersPDF, 491 Kb, 档案已发布: Sep 6, 2016
Asynchronous boost converters require a Schottky diode as the rectifying element due to the diode's lowforward voltage and fast turn-on time. Because of these characteristics asynchronous boost converterscan have as good as, or better efficiency, than synchronous boost converters. This is especially true whenthe boost conversion ratios (VOUT/VIN) are high, and the Schottky diode conduction t - Inductor Selection in Boost Converters for LCD Backlight ApplicationsPDF, 764 Kb, 档案已发布: Oct 24, 2016
White LED drivers for LCD back-light applications are often designed for battery-powered devices. This makes circuit size and efficiency crucial. Because of this, selecting the optimal inductor is one of the mostimportant aspects of the design. This application note discusses the important parameters of the inductorand how to select the right inductor for the application. - Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
模型线
系列: TPS61165 (7)
- HPA00735DRVR TPS61165DBVR TPS61165DBVT TPS61165DRVR TPS61165DRVRG4 TPS61165DRVT TPS61165DRVTG4
制造商分类
- Semiconductors > Power Management > LED Driver > Backlight LED Driver