Datasheet Texas Instruments TMS320C6452CUT9 — 数据表
制造商 | Texas Instruments |
系列 | TMS320C6452 |
零件号 | TMS320C6452CUT9 |
数字信号处理器529-FCBGA 0至90
数据表
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 529 |
Package Type | CUT |
Width (mm) | 19 |
Length (mm) | 19 |
Thickness (mm) | 2.65 |
Mechanical Data | 下载 |
参数化
DSP | 1 C64x+ |
Rating | Catalog |
生态计划
RoHS | See ti.com |
设计套件和评估模块
- Evaluation Modules & Boards: TMDXEVM6452
C6452 DSP Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
XDS560v2 System Trace USB & Ethernet Debug Probe
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU200-U
XDS200 USB Debug Probe
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
XDS560v2 System Trace USB Debug Probe
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Using the TMS320C6452 Bootloader (Rev. A)PDF, 307 Kb, 修订版: A, 档案已发布: Jun 1, 2009
This document describes the functionality of the TMS320C6452 ROM bootloader software. The ROM bootloader resides in the ROM of the device beginning at ROM address 0x00100000. The ROM boot loader (RBL) implements methods for booting in the listed modes. It reads the contents of the BOOTCFG register to determine boot mode and performs appropriate commands to effect boot of device. If an improper boo - Implementing DDR2 PCB Layout on the TMS320C6452 DMSoC (Rev. A)PDF, 149 Kb, 修订版: A, 档案已发布: Mar 25, 2008
This application report contains implementation instructions for the DDR2 interface contained on the TMS320C6452 digital signal processor (DSP) device. The approach to specifying interface timing for the DDR2 interface is quite different than on previous devices.The previous approach specified device timing in terms of data sheet specifications andsimulation models. The system designer was re - TMS320C6452 Power Consumption Summary (Rev. C)PDF, 132 Kb, 修订版: C, 档案已发布: Jan 6, 2010
NOTE: PRELIMINARY DATA FOR TMX DEVICES. INFORMATION SUBJECT TO CHANGEThis application report discusses power consumption of the Texas Instruments TMS320C6452 Digital Signal Processor (DSP). Power consumption is highly application-dependent, so a spreadsheet is provided to model power consumption for your applications. - Error Detection and Correction Mechanism of TMS320C64x+/C674x (Rev. A)PDF, 80 Kb, 修订版: A, 档案已发布: Jul 19, 2013
This application report describes the error detection and correction mechanism of the C64x+/C674x megamodule L1P and L2 memories implemented on some devices. Depending on the type of application, these mechanisms are used to either provide diagnostic measures to detect faults in the memory that could lead to unacceptable risk for the user or to increase the availability of the system. - EDMA v2.0 to EDMA v3.0 (EDMA3) Migration Guide (Rev. A)PDF, 292 Kb, 修订版: A, 档案已发布: Aug 21, 2008
This application report summarizes the key differences between the enhanced direct memory access (EDMA3) used on C64x+в„ў DSP devices and the EDMA2 used on TMS320C64xв„ў DSP devices, and provides guidance for migrating from EDMA2 to EDMA3. - Introduction to TMS320C6000 DSP OptimizationPDF, 535 Kb, 档案已发布: Oct 6, 2011
The TMS320C6000™ Digital Signal Processors (DSPs) have many architectural advantages that make them ideal for computation-intensive real-time applications. However to fully leverage the architectural features that C6000™ processors offer code optimization may be required. First this document reviews five key concepts in understanding the C6000 DSP architecture and optimization. Then
模型线
系列: TMS320C6452 (2)
- TMS320C6452CUT9 TMS320C6452ZUT9
制造商分类
- Semiconductors > Processors > Digital Signal Processors > C6000 DSP > Other C6000 DSP