Datasheet Texas Instruments OPA2695IRGTRG4 — 数据表
制造商 | Texas Instruments |
系列 | OPA2695 |
零件号 | OPA2695IRGTRG4 |
具有禁用的16-VQFN -40至85的超宽带电流反馈运算放大器
数据表
Dual, Ultra-Wideband, Current-Feedback Operational Amplifier with Disable datasheet
PDF, 1.4 Mb, 修订版: A, 档案已发布: Aug 29, 2008
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 16 |
Package Type | RGT |
Industry STD Term | VQFN |
JEDEC Code | S-PQFP-N |
Package QTY | 3000 |
Carrier | LARGE T&R |
Device Marking | 2695 |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .9 |
Pitch (mm) | .5 |
Max Height (mm) | 1 |
Mechanical Data | 下载 |
参数化
2nd Harmonic | 73 dBc |
3rd Harmonic | 82 dBc |
@ MHz | 10 |
Acl, min spec gain | 1 V/V |
Additional Features | Shutdown |
Architecture | Bipolar,Current FB |
BW @ Acl | 1100 MHz |
CMRR(Min) | 51 dB |
CMRR(Typ) | 56 dB |
GBW(Typ) | 1100 MHz |
Input Bias Current(Max) | 30000000 pA |
Iq per channel(Max) | 13.3 mA |
Iq per channel(Typ) | 12.9 mA |
Number of Channels | 2 |
Offset Drift(Typ) | 15 uV/C |
Operating Temperature Range | -40 to 85 C |
Output Current(Typ) | 120 mA |
Package Group | VQFN |
Package Size: mm2:W x L | 16VQFN: 9 mm2: 3 x 3(VQFN) PKG |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ) | 2900 V/us |
Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 3.5 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 1.8 nV/rtHz |
Vn at Flatband(Typ) | 1.8 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 3.5 mV |
生态计划
RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: DEM-OPA-SO-2E
DEM-OPA-SO-2E
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Wireline Data Transmission and ReceptionPDF, 191 Kb, 档案已发布: Jan 27, 2010
Many types of wires are widely used to transmit data. Specifically, Category 3 and Category 5 (Cat3 and Cat5e, respectively)—also known as unshielded twisted pair or UTP lines—are now recommended for new telephone installations. Coaxial (coax) cables are used to distribute cable television (CATV) signals throughout a home. #12 and #14 American wire gauge (AWG) electric power distribution wire is a - Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A)PDF, 327 Kb, 修订版: A, 档案已发布: Sep 10, 2010
This application report discusses the performance-related aspects of passive and active interfaces at the analog input of high-speed pipeline analog-to-digital converters (ADCs). The report simplifies the many possibilities into two main categories: passive and active interface circuits. The first section of the report gives an overview of equivalent models of buffered and unbuffered ADC input cir - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA2695 (7)
- OPA2695ID OPA2695IDG4 OPA2695IDR OPA2695IRGTR OPA2695IRGTRG4 OPA2695IRGTT OPA2695IRGTTG4
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)