Datasheet Texas Instruments THS4001IDG4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | THS4001 |
| 零件号 | THS4001IDG4 |
270MHz电压反馈放大器8-SOIC -40至85
数据表
270-MHz High-Speed Voltage-Feedback Amplifier datasheet
PDF, 879 Kb, 修订版: A, 档案已发布: Mar 25, 1999
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | TUBE |
| Device Marking | 4001I |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | 下载 |
参数化
| 2nd Harmonic | 65 dBc |
| 3rd Harmonic | 62 dBc |
| @ MHz | 5 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 270 MHz |
| CMRR(Min) | 85 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 270 MHz |
| Input Bias Current(Max) | 5000000 pA |
| Iq per channel(Max) | 9.5 mA |
| Iq per channel(Typ) | 7.8 mA |
| Number of Channels | 1 |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 100 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 400 V/us |
| Total Supply Voltage(Max) | 30 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 12.5 nV/rtHz |
| Vn at Flatband(Typ) | 12.5 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 8 mV |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: THS7002EVM
THS7002 High Speed Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: THS6012EVM
THS6012 High Speed Amplifier Evaluation Modules
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: THS6022EVM
THS6022 High Speed Amplifier Evaluation Modules
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Driving Capacitance with the THS4001PDF, 51 Kb, 档案已发布: Feb 25, 1999
Operational amplifiers (op amps) are often used to drive devices that have significant input capacitance such as analog-to-digital converters, cables, MOSFETs, filter networks, etc. The effect of the capacitance is extra phase shift in the loop gain of the amplifier. This phase shift erodes the phase margin of the amplifier and may lead to instability. At high frequency, even a very small capacita - THS4001 SPICE Model PerformancePDF, 149 Kb, 档案已发布: Oct 14, 1999
This document outlines the SPICE model of the THS4001 high-speed monolithic operational amplifier. General information about the model file structure, performance comparison, model listing, and a brief comment about symbols are included. The listing can be copied and pasted into an ASCII editor, or it can be down loaded by visiting the THS4001 product folder at http://www.ti.com/sc/docs/products/a - 10-MHz Butterworth Filter Using the Operational Amplifier THS4001PDF, 248 Kb, 档案已发布: Oct 28, 1999
This application report describes the design of an active 10-MHz second-order Butterworth low-pass filter useful for band-limiting applications. As an active component, TI's operational amplifier type THS4001, which has a bandwidth of 300 MHz, was used. The design of the filter described in this report is typical of proactical applications, and the steps involved in calculating component values ca - Using References to Generate Offsets for the TLC55xx Family Data Converters (Rev. A)PDF, 72 Kb, 修订版: A, 档案已发布: Jul 29, 2002
This application report describes the process for using references to generate offsets for Texas Instrument?s TLC55XX family data converters. - Voltage Feedback vs. Current Feedback Op AmpsPDF, 93 Kb, 档案已发布: Nov 30, 1998
This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions. - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
模型线
系列: THS4001 (5)
- THS4001CD THS4001CDG4 THS4001CDR THS4001ID THS4001IDG4
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)