Datasheet Texas Instruments S4MF06607BSPZQQ1 — 数据表
制造商 | Texas Instruments |
系列 | TMS470MF06607 |
零件号 | S4MF06607BSPZQQ1 |
16/32位RISC闪存微控制器100-LQFP -40至125
数据表
TMS470MF06607 16/32-Bit RISC Flash Microcontroller datasheet
PDF, 534 Kb, 修订版: C, 档案已发布: Jan 31, 2012
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
打包
Pin | 100 | 100 |
Package Type | PZ | PZ |
Industry STD Term | LQFP | LQFP |
JEDEC Code | S-PQFP-G | S-PQFP-G |
Package QTY | 90 | 90 |
Carrier | JEDEC TRAY (5+1) | JEDEC TRAY (5+1) |
Device Marking | S4MF06607BSPZ | TMS470 |
Width (mm) | 14 | 14 |
Length (mm) | 14 | 14 |
Thickness (mm) | 1.4 | 1.4 |
Pitch (mm) | .5 | .5 |
Max Height (mm) | 1.6 | 1.6 |
Mechanical Data | 下载 | 下载 |
参数化
ADC | 10-Bit (16ch) |
CAN | 2 |
CPU | ARM-Cortex-M3 |
Core Supply | 3.3 Volts |
Data Flash | N/A KB |
EMAC | N/A |
EMIF | N/A |
ETM | N/A Trace |
Flash | 640 KB |
FlexRay | N/A |
Frequency | 80 MHz |
GPIO | 49 |
HET Channels | 16 |
IO Supply | 3.3 V |
MibSPI | 2 |
Non-volatile Memory | 256 KB |
Operating Temperature Range | -40 to 125 C |
Package Group | LQFP |
Package Size: mm2:W x L | 100LQFP: 256 mm2: 16 x 16(LQFP) PKG |
RAM | 64 KB |
RTP/DMM | N/A |
Rating | Automotive |
SCI | 2 |
SCI/LIN | 2/1 |
生态计划
RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: TMDX470MF066HDK
TMDX470MF066HDK Hercules Development Kit
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU100V2U-ARM
XDS100v2 JTAG Debug Probe (ARM version)
Lifecycle Status: Active (Recommended for new designs) - Development Kits: TMDX470MF066USB
TMS470M Microcontroller USB Kit
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
XDS100v2 JTAG Debug Probe (20-pin cTI version)
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
XDS100v2 JTAG Debug Probe (14-pin TI version)
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU200-U
XDS200 USB Debug Probe
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
XDS560v2 System Trace USB & Ethernet Debug Probe
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
XDS560v2 System Trace USB Debug Probe
Lifecycle Status: Active (Recommended for new designs)
应用须知
- CAN Bus Bootloader for TMS470M MCUPDF, 4.4 Mb, 档案已发布: Sep 16, 2013
A bootloader enables field updates of application firmware. A controller area network (CAN) bootloader enables firmware updates over the CAN bus. The CAN bootloader described in this application report is based on the Herculesв„ў ARMВ® Cortexв„ў-R4 microcontroller. This application report describes the CAN protocol used in the bootloader and details each supported command. - Using the SPI as an Extra UART TransmitterPDF, 564 Kb, 档案已发布: Jul 26, 2016
It is quite common, especially when developing an application based on an entry level microcontroller, to prioritize peripheral usage based on the application's functional requirements. It may be the case that all of the available UARTs on a device are used for functional purposes, leaving no UARTs available for the developer to use for logging debug messages. This application report demonstrates - Limiting Clamp Currents on TMS470/TMS570 Digital and Analog Inputs (Rev. A)PDF, 71 Kb, 修订版: A, 档案已发布: Dec 8, 2014
Digital and Analog input pins require protection from input voltages that are negative or positive exceeding the maximum input levels. This is a practical explanation of using the Electrostatic Discharge (ESD) protection diodes that are part of the input pins to help limit the voltage if input current is limited. - Configuring the Hercules ARM Safety MCU SCI/LIN Module for UART Communication (Rev. A)PDF, 548 Kb, 修订版: A, 档案已发布: Sep 6, 2011
The purpose of this application report is to provide help for configuring the SCI/LIN module of Hercules microcontrollers for universal asynchronous receiver-transmitter (UART) communication. The document explains the SCI/LIN module configuration done in the UART driver that is used by Texas Instruments (TIв„ў) in a safety demo of the Hercules product family. The Hercules family of microcontro - Configuring a CAN Node on Hercules ARM Safety MCUsPDF, 1.4 Mb, 档案已发布: Sep 6, 2011
- Interfacing TPS65381 With Hercules Microcontrollers (Rev. A)PDF, 155 Kb, 修订版: A, 档案已发布: Feb 14, 2014
The application report provides help to design a safety system with both the Hercules safety microcontrollers and the TPS65381 power supply. The document explains the hardware considerations and the software flowchart. - ADC Source Impedance for Hercules ARM Safety MCUs (Rev. B)PDF, 376 Kb, 修订版: B, 档案已发布: Sep 6, 2011
Unbuffered multiplexed ratiometric analog-to-digital converters (ADC) have strict requirements on driving source impedance that are not always obvious. This application report addresses the trade-offs between source impedance and sample rate. It includes both 10-bit and 12-bit examples using the TMS470 processors and the Hercules ARM Safety MCUs (TMS470M, TMS570 and RM4x families) in the GS30, GS4 - Usage of MPU Subregions on TI Hercules ARM Safety MCUsPDF, 79 Kb, 档案已发布: Mar 10, 2010
A Memory Protection Unit (MPU) is a module used to modify the memory types and attributes as defined in a processor’s memory ordering model. The MPU is specific to each core in the system and can only modify the memory ordering model of the CPU to which it is attached. If Texas Instruments TMSx70 platform of devices include a CortexR4 or a CortexM3 core, then as part of the core architecture, a MP - Generating Operating System Tick Using RTI on a Hercules ARM Safety MCUPDF, 659 Kb, 档案已发布: Jul 13, 2010
The purpose of this application report is to provide help for setting up the RTI Module of Hercules Safety Microcontrollers. The Hercules family of microcontrollers from Texas Instruments is a family of 32-bit RISC microcontrollers with an advanced safety architecture and a rich peripheral set. - Important ARM Ltd Application Notes for TI Hercules ARM Safety MCUsPDF, 61 Kb, 档案已发布: Nov 17, 2011
The purpose of this application report is to offer a convenient collection of references to application notes posted by ARM Ltd that apply to TI’s Hercules ARM Safety Microcontrollers. The document contains links directly to the ARM documents in the ARM On-Line InfoCenter as well as re-prints the ARM introduction chapter to help you better determine if you want to investigate further. - 3.3 V I/O Considerations for Hercules Safety MCUs (Rev. A)PDF, 103 Kb, 修订版: A, 档案已发布: Sep 6, 2011
As new generations of microcontrollers lower their supply voltages from 5 V to 3.3 V and beyond, issues with interfacing and noise are increasing. This application report presents cost-effective interfacing techniques for inputs and outputs of 3.3 V microprocessors in an automotive environment. In addition, concerns about 3.3 V analog-to-digital converters (ADC) are discussed.
模型线
系列: TMS470MF06607 (1)
- S4MF06607BSPZQQ1
制造商分类
- Semiconductors > Microcontrollers (MCU) > Performance MCUs > Safety > Hercules TMS470M