Datasheet Texas Instruments OPA170AIDRLR — 数据表
| 制造商 | Texas Instruments |
| 系列 | OPA170 |
| 零件号 | OPA170AIDRLR |
采用微型封装5-SOT-5X3的36V，微功耗，轨至轨输出，通用运算放大器-40至125
数据表
OPAx170 36-V, Single-Supply, SOT553, Low-Power OperationalВ AmplifiersВ ValueВ LineВ Series datasheet
PDF, 2.1 Mb, 修订版: C, 档案已发布: Mar 31, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 5 |
| Package Type | DRL |
| Industry STD Term | SOT-5X3 |
| JEDEC Code | R-PDSO-N |
| Package QTY | 4000 |
| Carrier | LARGE T&R |
| Device Marking | DAQ |
| Width (mm) | 1.2 |
| Length (mm) | 1.6 |
| Thickness (mm) | .55 |
| Pitch (mm) | .5 |
| Max Height (mm) | .6 |
| Mechanical Data | 下载 |
参数化
| Additional Features | EMI Hardened,Tiny Package |
| Architecture | CMOS |
| CMRR(Min) | 104 dB |
| CMRR(Typ) | 120 dB |
| GBW(Typ) | 1.2 MHz |
| Input Bias Current(Max) | 15 pA |
| Iq per channel(Max) | 0.145 mA |
| Iq per channel(Typ) | 0.1 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.3 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 17 mA |
| Package Group | SOT-5X3 |
| Package Size: mm2:W x L | 5SOT-5X3: 3 mm2: 1.6 x 1.6(SOT-5X3) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 0.4 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 19 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 1.8 mV |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: AMPQUICKKIT-EVM
TI Precision Amplifier Quickstart Kit
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: OPAMPEVM
Universal Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- OPA170, OPA2170, OPA4170 EMI Immunity Performance (Rev. A)PDF, 90 Kb, 修订版: A, 档案已发布: Nov 3, 2012
- Combined Voltage and Current Output with the DACx760PDF, 969 Kb, 档案已发布: Jul 24, 2014
- Compensate Transimpedance Amplifiers Intuitively (Rev. A)PDF, 69 Kb, 修订版: A, 档案已发布: Mar 30, 2005
Transimpedance amplifiers are used to convert low-level photodiode currents to usable voltage signals. All too often, the amplifiers have to be empirically compensated to operate properly. The problem can be easily understood if one looks at all the elements involved. - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA170 (6)
- OPA170AID OPA170AIDBVR OPA170AIDBVT OPA170AIDR OPA170AIDRLR OPA170AIDRLT
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps