Datasheet Texas Instruments LM6132AIM — 数据表
制造商 | Texas Instruments |
系列 | LM6132 |
零件号 | LM6132AIM |
双路低功耗10 MHz轨至轨I / O运算放大器8-SOIC -40至85
数据表
LM6132/LM6134 Dual and Quad Low Power 10В MHz Rail-to-Rail I/O Operational Amplifiers datasheet
PDF, 1.5 Mb, 修订版: E, 档案已发布: Sep 5, 2014
从文件中提取
价格
状态
Lifecycle Status | NRND (Not recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 8 | 8 |
Package Type | D | D |
Industry STD Term | SOIC | SOIC |
JEDEC Code | R-PDSO-G | R-PDSO-G |
Package QTY | 95 | 95 |
Carrier | TUBE | TUBE |
Device Marking | 32AIM | LM61 |
Width (mm) | 3.91 | 3.91 |
Length (mm) | 4.9 | 4.9 |
Thickness (mm) | 1.58 | 1.58 |
Pitch (mm) | 1.27 | 1.27 |
Max Height (mm) | 1.75 | 1.75 |
Mechanical Data | 下载 | 下载 |
替代品
Replacement | LM6132AIM/NOPB |
Replacement Code | S |
参数化
Additional Features | N/A |
Architecture | Bipolar |
CMRR(Min) | 75 dB |
CMRR(Typ) | 107 dB |
GBW(Typ) | 10 MHz |
Input Bias Current(Max) | 140000 pA |
Iq per channel(Max) | 0.45 mA |
Iq per channel(Typ) | 0.36 mA |
Number of Channels | 2 |
Offset Drift(Typ) | 5 uV/C |
Operating Temperature Range | -40 to 85 C |
Output Current(Typ) | 4.3 mA |
Package Group | SOIC |
Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
Rail-to-Rail | In,Out |
Rating | Catalog |
Slew Rate(Typ) | 14 V/us |
Total Supply Voltage(Max) | 24 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 27 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 2 mV |
生态计划
RoHS | See ti.com |
应用须知
- AN-1237 RSDSв„ў Flat Panel Display Design Guidelines Part 2 (Rev. A)PDF, 194 Kb, 修订版: A, 档案已发布: May 6, 2013
This application report presents part 2 of the flat panel display design guidelines. - AN-1234 RSDSв„ў Flat Panel Display Design Guidelines Part 1 (Rev. A)PDF, 245 Kb, 修订版: A, 档案已发布: May 6, 2013
This application report outlines the total system solution that Texas Instruments provides for flat panel displays (FPDs). The described design uses an reduced swing differential signaling (RSDS) interface technology for reduced power, reduced board size, reduced component count, and reduced EMI. This document is currently applicable to XGA and SXGA notebook and monitor applications. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, 修订版: A, 档案已发布: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
模型线
系列: LM6132 (9)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps