Datasheet Texas Instruments OPA2889IDR — 数据表
| 制造商 | Texas Instruments |
| 系列 | OPA2889 |
| 零件号 | OPA2889IDR |
具有禁用8-SOIC -40至85的双路，低功耗，宽带，电压反馈运算放大器
数据表
Dual, Low-Power, Wideband, Voltage-Feedback OPERATIONAL AMPLIFIER with Disable datasheet
PDF, 1.3 Mb, 修订版: B, 档案已发布: Aug 28, 2008
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | OP2889 |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | 下载 |
参数化
| 2nd Harmonic | 75 dBc |
| 3rd Harmonic | 80 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 115 MHz |
| CMRR(Min) | 60 dB |
| CMRR(Typ) | 70 dB |
| GBW(Typ) | 115 MHz |
| Input Bias Current(Max) | 750000 pA |
| Iq per channel(Max) | 0.5 mA |
| Iq per channel(Typ) | 0.46 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 20 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 40 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 250 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.6 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 8.4 nV/rtHz |
| Vn at Flatband(Typ) | 8.4 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: DEM-OPA-SO-2A
DEM-OPA-SO-2A
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Making the Most of a Low-Power, High-Speed Operational AmplifierPDF, 221 Kb, 档案已发布: Nov 22, 2009
High-speed, high-performance operational amplifiers tend to be associated with high power dissipation. This application note compares the relative performance of several low-power, high-speed operational amplifiers and describes trade-offs to balance performance with low quiescent power dissipation. - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA2889 (7)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)