Datasheet Texas Instruments OPA365AIDG4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | OPA365 |
| 零件号 | OPA365AIDG4 |
2.2V，50MHz，低噪声，单电源轨到轨运算放大器8-SOIC -40至125
数据表
OPAx365 50-MHz, ZerГё-Crossover, Low-Distortion, High CMRR, RRI/O, Single-Supply Operational Amplifier datasheet
PDF, 1.2 Mb, 修订版: E, 档案已发布: Aug 25, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | TUBE |
| Device Marking | O365A |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | 下载 |
参数化
| 2nd Harmonic | 81 dBc |
| 3rd Harmonic | 93 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Zero Crossover |
| Architecture | CMOS,Voltage FB |
| BW @ Acl | 50 MHz |
| CMRR(Min) | 100 dB |
| CMRR(Typ) | 120 dB |
| GBW(Typ) | 50 MHz |
| Input Bias Current(Max) | 10 pA |
| Iq per channel(Max) | 5 mA |
| Iq per channel(Typ) | 4.6 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 65 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 25 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.2 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 4.5 nV/rtHz |
| Vn at Flatband(Typ) | 4.5 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.2 mV |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: ADS7049-Q1EVM-PDK
ADS7049-Q1 Ultra-Low-Power Ultra-Small-Size 12-Bit 2MSPS SAR ADC Performance Demonstration Kit (PDK)
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Zero-crossover Amplifiers: Features and Benefits (Rev. A)PDF, 296 Kb, 修订版: A, 档案已发布: Feb 9, 2017
- Low Power Input and Reference Driver Circuit for ADS8318 and ADS8319PDF, 1.5 Mb, 档案已发布: Jun 24, 2009
The one size fits all approach to operational amplifiers is not effective. Every application has its own specific requirements that must be fulfilled. Appropriate selection of the op amp that drives an analog-to-digital converter (ADC) in a low-power application is a critical step. Most available low-power op amps trade off low-power features with other parameters such as bandwidth, settling t - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA365 (8)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)