Datasheet Texas Instruments THS6053CPWPR — 数据表

具有关断状态的175mA，+ /-12V ADSL CPE线路驱动器14-HTSSOP 0至70

数据表

PDF, 1.1 Mb, 修订版: D, 档案已发布: Dec 13, 2001

从文件中提取

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Acl, min spec gain	1 V/V
Additional Features	Shutdown
Architecture	Current FB
BW @ Acl	170 MHz
CMRR(Min)	59 dB
CMRR(Typ)	66 dB
GBW(Typ)	170 MHz
Input Bias Current(Max)	10000000 pA
Iq per channel(Max)	7 mA
Iq per channel(Typ)	5.2 mA
Number of Channels	2
Offset Drift(Typ)	30 uV/C
Operating Temperature Range	-40 to 85,0 to 70 C
Output Current(Typ)	175 mA
Package Group	HTSSOP
Package Size: mm2:W x L	14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP) PKG
Rail-to-Rail	No
Rating	Catalog
Slew Rate(Typ)	1700 V/us
Total Supply Voltage(Max)	33 +5V=5, +/-5V=10
Total Supply Voltage(Min)	9 +5V=5, +/-5V=10
Vn at Flatband(Typ)	2.1 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	10 mV

RoHS

Compliant

Evaluation Modules & Boards: THS6053EVM
THS6053 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- 下载

下载
Active Output Impedance for ADSL Line Drivers
PDF, 636 Kb, 档案已发布: Nov 26, 2002
Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the
下载
Noise Analysis for High Speed Op Amps (Rev. A)
PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

系列: THS6053 (4)

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)