Datasheet Texas Instruments INA106KPG4 — 数据表

制造商	Texas Instruments
系列	INA106
零件号	INA106KPG4

精密固定增益差分放大器8-PDIP -40至85

数据表

下载

PDF, 1.5 Mb, 修订版: A, 档案已发布: Oct 7, 2003

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

打包

Pin	8
Package Type	P
Industry STD Term	PDIP
JEDEC Code	R-PDIP-T
Package QTY	50
Carrier	TUBE
Device Marking	INA106KP
Width (mm)	6.35
Length (mm)	9.81
Thickness (mm)	3.9
Pitch (mm)	2.54
Max Height (mm)	5.08
Mechanical Data	下载

参数化

CMRR(Min)	86 dB
Common Mode Input High(Max)	11 V
Common Mode Input High(Min)	11 V
Common Mode Input Low(Min)	-11 V
Gain	10 V/V
Gain Drift(Max)	4 ppm/C
Gain Error (+/-)(Max)	0.025 %
Gain(Max)	10 V/V
Gain(Min)	10 V/V
Input Offset (+/-)(Max)	200 uV
Iq(Typ)	1.5 mA
Number of Channels	1
Operating Temperature Range	-40 to 85 C
Package Group	PDIP
Package Size: mm2:W x L	See datasheet (PDIP) PKG
Rating	Catalog
Slew Rate(Typ)	3 V/us
Small Signal Bandwidth(Typ)	5 MHz
Vs(Max)	36 V
Vs(Min)	10 V

生态计划

RoHS

Compliant

应用须知

下载
Boost Amplifier Output Swing With Simple Modification
PDF, 46 Kb, 档案已发布: Sep 27, 2000
In many applications it is desirable for the output of an amplifier to swing close to its power supply rails. Most amplifiers only guarantee an output swing of В±10V to В±12V when operating on standard В±15V power supplies. With the addition of four resistors and a pair of garden-variety transistors, the INA105 or INA106 difference amplifiers can be modified to provide nearly a f
下载
Boost Instrument Amp CMR With Common-Mode Driven Supplies
PDF, 175 Kb, 档案已发布: Sep 27, 2000
Ever-increasing demands are being placed on instrumentation amplifier (IA) performance. When standard IAs can not deliver the required performance, consider this enhanced version. Dramatic performance improvements can be achieved by operating the input amplifiers of a classical three-op-amp IA from common-mode driven sub-regulated power supplies.
下载
AC Coupling Instrumentation and Difference Amplifiers
PDF, 38 Kb, 档案已发布: Sep 27, 2000
The need to glean AC signals from DC in the presence of common-mode noise frequently occurs in signal conditioning applications. AC coupling to an instrumentation amplifier (IA) or difference amplifier can be used to accurately extract the AC signal while rejecting DC and common-mode noise.
下载
Implementation and Applications of Current Sources and Current Receivers
PDF, 427 Kb, 档案已发布: Sep 27, 2000
This application guide is intended as a source book for the design and application of: Current sourcesCurrent sinksFloating current sourcesVoltage-to-current converters(transconductance amplifiers)Current-to-current converters (current mirrors)Current-to-voltage converters(transimpedance amplifiers)

模型线

系列: INA106 (5)

INA106KP INA106KPG4 INA106U INA106U/2K5 INA106UE4

制造商分类

Semiconductors > Amplifiers > Difference Amplifiers