Datasheet Texas Instruments THS4281DGK — 数据表
| 制造商 | Texas Instruments |
| 系列 | THS4281 |
| 零件号 | THS4281DGK |
超低功耗高速轨至轨输入/输出电压反馈运算放大器8-VSSOP -40至85
数据表
THS4281 Very Low-Power, High-Speed, Rail-to-Rail Input and Output Voltage-Feedback Operational Amplifier datasheet
PDF, 2.8 Mb, 修订版: B, 档案已发布: Oct 30, 2015
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 80 |
| Carrier | TUBE |
| Device Marking | AOO |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | 下载 |
参数化
| 2nd Harmonic | 69 dBc |
| 3rd Harmonic | 76 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 95 MHz |
| CMRR(Min) | 90 dB |
| CMRR(Typ) | 107 dB |
| GBW(Typ) | 95 MHz |
| Input Bias Current(Max) | 800000 pA |
| Iq per channel(Max) | 0.93 mA |
| Iq per channel(Typ) | 0.8 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 7 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 30 mA |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 35 V/us |
| Total Supply Voltage(Max) | 16.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 12.5 nV/rtHz |
| Vn at Flatband(Typ) | 12.5 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2.5 mV |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: THS4281EVM
THS4281 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Low Power Input and Reference Driver Circuit for ADS8318 and ADS8319PDF, 1.5 Mb, 档案已发布: Jun 24, 2009
The one size fits all approach to operational amplifiers is not effective. Every application has its own specific requirements that must be fulfilled. Appropriate selection of the op amp that drives an analog-to-digital converter (ADC) in a low-power application is a critical step. Most available low-power op amps trade off low-power features with other parameters such as bandwidth, settling t - Voltage Feedback vs. Current Feedback Op AmpsPDF, 93 Kb, 档案已发布: Nov 30, 1998
This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions. - Designing for low distortion with high-speed op ampsPDF, 277 Kb, 档案已发布: Mar 2, 2005
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
模型线
系列: THS4281 (11)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)