Datasheet Texas Instruments TXS0101DRLR — 数据表

制造商Texas Instruments
系列TXS0101
零件号TXS0101DRLR
Datasheet Texas Instruments TXS0101DRLR

1位双向电压电平转换器,用于漏极开路和推挽式应用6-SOT-5X3 -40至85

数据表

TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications datasheet
PDF, 1.2 Mb, 修订版: D, 档案已发布: Jun 22, 2017
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin6
Package TypeDRL
Industry STD TermSOT-5X3
JEDEC CodeR-PDSO-N
Package QTY4000
CarrierLARGE T&R
Device Marking2GR
Width (mm)1.2
Length (mm)1.6
Thickness (mm).55
Pitch (mm).5
Max Height (mm).6
Mechanical Data下载

参数化

3-State OutputNo
Bits1
F @ Nom Voltage(Max)12 Mhz
Gate TypeN/A
ICC @ Nom Voltage(Max)0.012 mA
LogicTrue
Operating Temperature Range-40 to 85,-55 to 125 C
Output Drive (IOL/IOH)(Max)1/-.02 mA
Package GroupSOT-5X3
Package Size: mm2:W x L6SOT-5X3: 3 mm2: 1.6 x 1.6(SOT-5X3) PKG
RatingCatalog
Schmitt TriggerNo
Special FeaturesOne-Shot Edge Accelerators,Bidirectional
Sub-FamilyDual Supply Translator
Technology FamilyTXS
VCC(Max)5.5 V
VCC(Min)1.65 V
Voltage(Nom)3.3 V
tpd @ Nom Voltage(Max)4.2 ns

生态计划

RoHSCompliant

设计套件和评估模块

  • Development Kits: DLPLIGHTCRAFTER
    DLPВ® LightCrafterВ™ Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Effects of pullup and pulldown resistors on TXS and TXB devices
    PDF, 732 Kb, 档案已发布: Sep 20, 2017
    The TXS and TXB family of devices belong to the auto-bidirectional translation products from TI. These devices can be sensitive to external pullup or pulldown resistors due to the internal pullup resistors present in the TXS device and the internal serial resistors present in the TXB device. In this application note, the effects of external pullup and pulldown resistors on VOL and VOH levels of th
  • A Guide to Voltage Translation With TXS-Type Translators
    PDF, 287 Kb, 档案已发布: Jun 29, 2010
    Modern trends are driving the need for lower supply voltages across many system-level designs. As most processor voltage levels continue to decrease in the interest of achieving the lowest possible power consumption, peripheral devices maintain a need for higher voltage levels, creating potential for voltage discontinuities within a system. To remedy this mixed voltage system incompatibility, a vo

模型线

制造商分类

  • Semiconductors > Logic > Little Logic