Datasheet Texas Instruments TLC081CDGN — 数据表
制造商 | Texas Instruments |
系列 | TLC081 |
零件号 | TLC081CDGN |
单路宽带高输出驱动器单电源运算放大器8-MSOP-PowerPAD 0至70
数据表
TLC080 - Family of Wide-Bandwidth High-Output-Drive Single Supply Op Amps datasheet
PDF, 2.1 Mb, 修订版: F, 档案已发布: Dec 7, 2011
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 8 |
Package Type | DGN |
Industry STD Term | HVSSOP |
JEDEC Code | S-PDSO-G |
Package QTY | 80 |
Carrier | TUBE |
Device Marking | ACY |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | 1.02 |
Pitch (mm) | .65 |
Max Height (mm) | 1.1 |
Mechanical Data | 下载 |
参数化
Additional Features | N/A |
Architecture | CMOS |
CMRR(Min) | 80 dB |
CMRR(Typ) | 110 dB |
GBW(Typ) | 10 MHz |
Input Bias Current(Max) | 50 pA |
Iq per channel(Max) | 2.5 mA |
Iq per channel(Typ) | 1.8 mA |
Number of Channels | 1 |
Offset Drift(Typ) | 1.2 uV/C |
Operating Temperature Range | -40 to 125,0 to 70 C |
Output Current(Typ) | 100 mA |
Package Group | MSOP-PowerPAD |
Package Size: mm2:W x L | 8MSOP-PowerPAD: 15 mm2: 4.9 x 3(MSOP-PowerPAD) PKG |
Rail-to-Rail | In to V- |
Rating | Catalog |
Slew Rate(Typ) | 16 V/us |
Total Supply Voltage(Max) | 16 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 4.5 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 8.5 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 1.9 mV |
生态计划
RoHS | Compliant |
应用须知
- TLC08x and TLC08xA EMI Immunity PerformancePDF, 88 Kb, 档案已发布: Aug 19, 2013
- Conditioning a Switch-mode Power Supply Current Signal Using TI Op AmpsPDF, 61 Kb, 档案已发布: Mar 23, 2000
The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
模型线
系列: TLC081 (13)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps