Datasheet Texas Instruments LM1117IMPX-3.3/NOPB — 数据表

制造商Texas Instruments
系列LM1117
零件号LM1117IMPX-3.3/NOPB
Datasheet Texas Instruments LM1117IMPX-3.3/NOPB

具有内部电流限制的节省空间的800mA低压降线性稳压器4-SOT-223 -40至125

数据表

Datasheet LM1117
PDF, 2.8 Mb, 修订版: N, 档案已发布: Dec 31, 2015, 页数: 36
800-mA Low-Dropout Linear Regulator
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin4
Package TypeDCY
Industry STD TermSOT-223
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingN05B
Width (mm)3.5
Length (mm)6.5
Thickness (mm)1.6
Pitch (mm)2.3
Max Height (mm)1.8
Mechanical Data下载

参数化

Accuracy3 %
Fixed Output Options1.8,2.5,3.3,5 V
Iout(Max)0.8 A
Iq(Typ)5 mA
Noise38 uVrms
Operating Temperature Range-40 to 125,0 to 125 C
Output Capacitor TypeNon-Ceramic
Output OptionsAdjustable Output,Fixed Output
PSRR @ 100KHz47 dB
Package GroupSOT-223
Package Size: mm2:W x L4SOT-223: 46 mm2: 7 x 6.5(SOT-223) PKG
RatingCatalog
Regulated Outputs1
Special FeaturesN/A
Thermal Resistance ОёJA24 В°C/W
Vdo(Typ)1200 mV
Vin(Max)15 V
Vin(Min)2.6 V
Vout(Max)13.8 V
Vout(Min)1.25 V

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: DLPDLCR4710EVM-G2
    Full HD DLP4710 Chipset Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • A Topical Index of TI LDO Application Notes (Rev. F)
    PDF, 82 Kb, 修订版: F, 档案已发布: Jun 27, 2019
  • Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
    PDF, 509 Kb, 修订版: A, 档案已发布: Jun 4, 2008
  • Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A)
    PDF, 284 Kb, 修订版: A, 档案已发布: May 5, 2013
    When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
  • Linear power for automated industrial systems
    PDF, 1.8 Mb, 档案已发布: Jan 9, 2015
    Designing a robust power management system for industrial automated equipment requires thorough understanding of the surroundings and conditions that affect the functionality. During the past few decades industrial and factory automation systems have become more robust intelligent and connected which has drastically increased the footprint for semiconductor components. This change has created a
  • AN-182 Improving Power Supply Reliability with IC Power Regulators (Rev. B)
    PDF, 82 Kb, 修订版: B, 档案已发布: May 5, 2013
    This application report discusses improving power supply reliability with IC power regulators.
  • AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)
    PDF, 300 Kb, 修订版: B, 档案已发布: May 6, 2013
    This application note discusses the operation and compensation of linear regulators.
  • AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
    PDF, 814 Kb, 修订版: A, 档案已发布: May 6, 2013
    The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
  • AN-181 3-Terminal Regulator is Adjustable (Rev. B)
    PDF, 314 Kb, 修订版: B, 档案已发布: May 5, 2013
    Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
  • Understanding the Terms and Definitions of LDO Voltage Regulators
    PDF, 197 Kb, 档案已发布: Oct 21, 1999
    This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
  • AN-1028 Maximum Power Enhancement Techniques for Power Packages (Rev. B)
    PDF, 684 Kb, 修订版: B, 档案已发布: May 6, 2013
    The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example.
  • AN-1482 LDO Regulator Stability Using Ceramic Output Capacitors (Rev. A)
    PDF, 169 Kb, 修订版: A, 档案已发布: Apr 25, 2013
    Ultra-low ESR capacitors such as ceramics are highly desirable because they can support fast-changingload transients and also bypass very high frequency noise coming from switching converter powersources which a linear regulator can not reject. However using ultra-low ESR capacitors on the output ofan LDO regulator requires that specific design changes be implemented to ensure loop stabili
  • LDO PSRR Measurement Simplified (Rev. A)
    PDF, 131 Kb, 修订版: A, 档案已发布: Aug 9, 2017
    This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, 档案已发布: May 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

模型线

制造商分类

  • Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO

其他名称:

LM1117IMPX3.3/NOPB, LM1117IMPX 3.3/NOPB