Datasheet Texas Instruments OPA1622IDRCR — 数据表
制造商 | Texas Instruments |
系列 | OPA1622 |
零件号 | OPA1622IDRCR |
具有高性能,低THD + N和双极性输入10-VSON -40至125的SoundPlus™音频运算放大器
数据表
OPA1622 SoundPlusв„ў High-Fidelity, Bipolar-Input, Audio Operational Amplifier datasheet
PDF, 2.3 Mb, 修订版: B, 档案已发布: May 3, 2016
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
打包
Pin | 10 |
Package Type | DRC |
Industry STD Term | VSON |
JEDEC Code | S-PDSO-N |
Package QTY | 3000 |
Carrier | LARGE T&R |
Device Marking | O1622 |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .9 |
Pitch (mm) | .5 |
Max Height (mm) | 1 |
Mechanical Data | 下载 |
参数化
Additional Features | Burr-Brownв„ў Audio,High Cload Drive,Shutdown,Tiny Package |
Architecture | Bipolar |
CMRR(Min) | 110 dB |
CMRR(Typ) | 127 dB |
GBW(Typ) | 32 MHz |
Input Bias Current(Max) | 2000000 pA |
Iq per channel(Max) | 3 mA |
Iq per channel(Typ) | 2.6 mA |
Number of Channels | 2 |
Offset Drift(Typ) | 0.5 uV/C |
Operating Temperature Range | -40 to 125 C |
Output Current(Typ) | 145 mA |
Package Group | VSON |
Package Size: mm2:W x L | 10VSON: 9 mm2: 3 x 3(VSON) PKG |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ) | 10 V/us |
Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 4 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 2.8 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 0.5 mV |
生态计划
RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: OPA1622EVM
OPA1622 Audio Operational Amplifier Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- HiFi Audio Circuit DesignPDF, 252 Kb, 档案已发布: Aug 23, 2017
With the increase in personal electronic devices, HiFi audio is more popular than ever in many applications, such as smartphones, music players, home theaters, and even car infotainment. Many engineers and consumers devote themselves to the endless journey in HiFi audio. This document will help engineers understand, judge, design, and optimize a HiFi audio circuit. - Stabilizing difference amplifiers for headphone applicationsPDF, 670 Kb, 档案已发布: Apr 28, 2015
- Reducing distortion from CMOS analog switchesPDF, 375 Kb, 档案已发布: Jan 29, 2015
- Distortion and source impedance in JFET-input op ampsPDF, 182 Kb, 档案已发布: Oct 24, 2014
- Compensate Transimpedance Amplifiers Intuitively (Rev. A)PDF, 69 Kb, 修订版: A, 档案已发布: Mar 30, 2005
Transimpedance amplifiers are used to convert low-level photodiode currents to usable voltage signals. All too often, the amplifiers have to be empirically compensated to operate properly. The problem can be easily understood if one looks at all the elements involved. - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA1622 (2)
- OPA1622IDRCR OPA1622IDRCT
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps