Datasheet Texas Instruments TPS63030DSKR — 数据表

制造商Texas Instruments
系列TPS63030
零件号TPS63030DSKR
Datasheet Texas Instruments TPS63030DSKR

具有1-A开关的高效单电感器Buck-Boost转换器10-SON -40至85

数据表

TPS6303x High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches datasheet
PDF, 1.6 Mb, 修订版: C, 档案已发布: Oct 28, 2014
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin10
Package TypeDSK
Industry STD TermWSON
JEDEC CodeS-PDSO-N
Package QTY3000
CarrierLARGE T&R
Device MarkingCEE
Width (mm)2.5
Length (mm)2.5
Thickness (mm).75
Pitch (mm).5
Max Height (mm).8
Mechanical Data下载

参数化

Duty Cycle(Max)100 %
Iout(Max)0.5 A
Iq(Typ)0.025 mA
Operating Temperature Range-40 to 85 C
Package GroupSON
RatingCatalog
Special FeaturesEnable,Frequency Synchronization,Light Load Efficiency,Load Disconnect,Synchronous Rectification,UVLO Fixed
Switch Current Limit(Min)0.8 A
Switch Current Limit(Typ)1 A
Switching Frequency(Max)2600 kHz
Switching Frequency(Min)2200 kHz
TopologyBuck/Boost
TypeConverter
Vin(Max)5.5 V
Vin(Min)1.8 V
Vout(Max)5.5 V
Vout(Min)1.2 V

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: TPS63030EVM-417
    TPS63030 5.5V Input, 3.3V Output, 0.5A Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS63030EVM-658
    TPS63030 Single LED 500mA Driver 2V to 5V input voltage Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Different methods to drive LEDs using TPS63xxx buck-boost converters (Rev. B)
    PDF, 86 Kb, 修订版: B, 档案已发布: Jan 12, 2012
  • Low-power TEC driver
    PDF, 75 Kb, 档案已发布: Nov 18, 2014
    TPS63020 Low Power TEC Driver
  • High Efficiency DCDC Converter Reference Design for Stellaris (Rev. A)
    PDF, 952 Kb, 修订版: A, 档案已发布: Apr 7, 2010
  • Extending the Soft Start Time in the TPS63010 Buck-Boost Converter
    PDF, 262 Kb, 档案已发布: Dec 5, 2012
  • Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)
    PDF, 400 Kb, 修订版: B, 档案已发布: Jul 9, 2018
    This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, 档案已发布: Apr 26, 2012
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, 修订版: B, 档案已发布: Aug 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, 档案已发布: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
  • 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B)
    PDF, 961 Kb, 修订版: B, 档案已发布: Jun 14, 2010
    This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 1.8 V to 5.5 V, and who must increase the application run time by making use of the complete battery voltage range while still maintaining high efficiency over the entire battery life.

模型线

系列: TPS63030 (4)

制造商分类

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost, Inverting or Split-Rail Converter (Integrated Switch)