3/4引脚1.5A可调正电压调节器3-TO-220 0至125
PDF, 104 Kb, 档案已发布: Oct 3, 2002
PDF, 219 Kb, 修订版: B, 档案已发布: May 5, 2013
This application report provides applications for the Texas Instruments LM117 3-terminal adjustableregulator.
PDF, 593 Kb, 修订版: B, 档案已发布: May 6, 2013
This application report provides on-card regulation for logic circuits.
PDF, 60 Kb, 修订版: B, 档案已发布: Apr 23, 2013
Conventional regulators have a high drop-out voltage that is a function of the total output current.However with just a regulator chip an external transistor and a few passive components this designforms a high output current regulator with a limited input voltage and high efficiency. The circuit presentedhas a drop-out of 0.7V at 5A load current and 1.3V at a current level of as high as
PDF, 104 Kb, 档案已发布: Oct 3, 2002
PDF, 105 Kb, 档案已发布: Oct 3, 2002
PDF, 47 Kb, 修订版: B, 档案已发布: May 6, 2013
This application note discusses the PNP voltage regulator.
PDF, 82 Kb, 修订版: B, 档案已发布: May 5, 2013
This application report discusses improving power supply reliability with IC power regulators.
PDF, 314 Kb, 修订版: B, 档案已发布: May 5, 2013
Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
PDF, 406 Kb, 修订版: B, 档案已发布: Apr 23, 2013
This application note describes line-powered equipment and power conversion techniques or methods tosolve those typical power needs.
PDF, 1.9 Mb, 档案已发布: Oct 28, 2013
PDF, 56 Kb, 档案已发布: Jun 15, 2015
PDF, 10.5 Mb, 修订版: A, 档案已发布: Apr 22, 2013
This application report explains how to implement a low noise switch mode power supply solution. Itintroduces the sources of noise and explain how to minimize them. A big factor in noise generation andpropagation is the printed circuit board layout. Important basics are discussed. Circuit measurementtechniques are also explained to guide a design engineer towards a low noise but efficient so
PDF, 149 Kb, 档案已发布: Oct 8, 2010
PDF, 1.8 Mb, 档案已发布: Jan 9, 2015
Designing a robust power management system for industrial automated equipment requires thorough understanding of the surroundings and conditions that affect the functionality. During the past few decades industrial and factory automation systems have become more robust intelligent and connected which has drastically increased the footprint for semiconductor components. This change has created a
PDF, 169 Kb, 修订版: A, 档案已发布: Apr 25, 2013
Ultra-low ESR capacitors such as ceramics are highly desirable because they can support fast-changingload transients and also bypass very high frequency noise coming from switching converter powersources which a linear regulator can not reject. However using ultra-low ESR capacitors on the output ofan LDO regulator requires that specific design changes be implemented to ensure loop stabili
PDF, 183 Kb, 档案已发布: Mar 21, 2007
PDF, 684 Kb, 修订版: B, 档案已发布: May 6, 2013
The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example.
PDF, 284 Kb, 修订版: A, 档案已发布: May 5, 2013
When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
PDF, 66 Kb, 档案已发布: May 7, 1999
This report presents a fundamental understanding on the theory of low-dropout voltage regulators using a PMOS FET as the pass element to adjust the output current to the load requirements.
PDF, 300 Kb, 修订版: B, 档案已发布: May 6, 2013
This application note discusses the operation and compensation of linear regulators.
PDF, 82 Kb, 修订版: F, 档案已发布: Jun 27, 2019
PDF, 785 Kb, 修订版: A, 档案已发布: Aug 9, 2017
Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.
PDF, 131 Kb, 修订版: A, 档案已发布: Aug 9, 2017
This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods