Datasheet Texas Instruments TPS62060DSGR — 数据表
| 制造商 | Texas Instruments |
| 系列 | TPS62060 |
| 零件号 | TPS62060DSGR |
采用2x2 SON封装的3MHz，1.6A降压转换器8-WSON -40至85
数据表
TPS6206x 3-MHz, 1.6-A, Step Down Converter in 2-mm Г— 2-mm WSON Package datasheet
PDF, 2.5 Mb, 修订版: B, 档案已发布: Jul 31, 2015
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 8 |
| Package Type | DSG |
| Industry STD Term | WSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | CGY |
| Width (mm) | 2 |
| Length (mm) | 2 |
| Thickness (mm) | .75 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | 下载 |
参数化
| Control Mode | Voltage Mode |
| Duty Cycle(Max) | 100 % |
| Iout(Max) | 1.6 A |
| Iq(Typ) | 0.018 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | WSON |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable,Light Load Efficiency,Output Discharge,Spread Spectrum,Synchronous Rectification |
| Switching Frequency(Max) | 3400 kHz |
| Switching Frequency(Min) | 2600 kHz |
| Type | Converter |
| Vin(Max) | 6 V |
| Vin(Min) | 2.7 V |
| Vout(Max) | 6 V |
| Vout(Min) | 0.8 V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: TPS62060EVM-663
TPS62060EVM-663 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Optimizing TPS6206x External Component SelectionPDF, 535 Kb, 档案已发布: Sep 14, 2010
The TPS6206x internal compensation network is optimized for an LC output filter composed of a 1-ВµH inductor and a 10-ВµF ceramic capacitor. The device is designed to operate with nominal inductor values of 1 ВµH to 1.2 ВµH and with ceramic capacitor values of 10 ВµF to 22 ВµF. By selecting the proper feedforward capacitor, a wider range of output inductors and capacitors can be used with the TPS6206x. - 2Q 2012 Issue Analog Applications JournalPDF, 2.4 Mb, 档案已发布: Apr 26, 2012
- Design considerations for a resistive feedback divider in a DC/DC converterPDF, 393 Kb, 档案已发布: Apr 26, 2012
- Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
- Five steps to a great PCB layout for a step-down converterPDF, 162 Kb, 档案已发布: Jan 29, 2015
- Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)PDF, 755 Kb, 修订版: A, 档案已发布: Jan 13, 2012
- Testing tips for applying external power to supply outputs without an input voltPDF, 110 Kb, 档案已发布: Oct 24, 2016
- Basic Calculation of a Buck Converter's Power Stage (Rev. B)PDF, 202 Kb, 修订版: B, 档案已发布: Aug 17, 2015
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
- QFN and SON PCB Attachment (Rev. B)PDF, 821 Kb, 修订版: B, 档案已发布: Aug 24, 2018
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, 档案已发布: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
模型线
系列: TPS62060 (2)
- TPS62060DSGR TPS62060DSGT
制造商分类
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)