Datasheet Texas Instruments LM10CWM — 数据表
| 制造商 | Texas Instruments |
| 系列 | LM10 |
| 零件号 | LM10CWM |
运算放大器和参考电压14-SOIC 0至70
数据表
Datasheet LM10
PDF, 3.2 Mb, 修订版: E, 档案已发布: Oct 30, 2015, 页数: 37
Operational Amplifier and Voltage Reference
Operational Amplifier and Voltage Reference
从文件中提取
价格
状态
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 14 |
| Package Type | NPA |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | LM10CWM |
| Width (mm) | 7.498 |
| Length (mm) | 8.992 |
| Thickness (mm) | 2.301 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 2.65 |
| Mechanical Data | 下载 |
替代品
| Replacement | LM10CWM/NOPB |
| Replacement Code | S |
参数化
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 90 dB |
| CMRR(Typ) | 102 dB |
| GBW(Typ) | 0.05 MHz |
| Input Bias Current(Max) | 20000 pA |
| Iq per channel(Max) | 0.4 mA |
| Iq per channel(Typ) | 0.27 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 20 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 14SOIC: 93 mm2: 10.325 x 8.9915(SOIC) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 0.2 V/us |
| Total Supply Voltage(Max) | 45 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 1.1 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 50 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
生态计划
| RoHS | See ti.com |
应用须知
- AN-211 New Op Amp Ideas (Rev. A)PDF, 1.4 Mb, 修订版: A, 档案已发布: May 6, 2013
An op amp and voltage reference capable of single supply operation down to 1.1V is introduced.Performance is uncompromised and compares favorably with standard, state-of-the-art devices. In adeparture from conventional approaches, the circuit can operate in a floating mode, powered by residualvoltages, independent of fixed supplies. A brief description of the IC design is given, but emphasis - AN-300 Simple Circuit Detects Loss of 4-20 mA Signal (Rev. B)PDF, 241 Kb, 修订版: B, 档案已发布: Apr 23, 2013
Four-to-twenty milliampere current loops are commonly used in the process control industry. They takeadvantage of the fact that a remote amplifier can be powered by the same 4-20 mA current that it controlsas its output signal, thus using a single pair of wires for signal and power. Circuits for making 4-20 mAtransmitters are found in the LM10, LM163, and LH0045 data sheets. - AN-288 System-Oriented DC-DC Conversion Techniques (Rev. B)PDF, 833 Kb, 修订版: B, 档案已发布: May 6, 2013
This application note discusses the operation of system-oriented DC-DC conversion techniques. - Applying a New Precision Op AmpPDF, 421 Kb, 档案已发布: Oct 4, 2004
- Using ADC0808/809 8-Bit uP Compble ADCs w/8-Chan Analog Multiplexr (Rev. B)PDF, 1.4 Mb, 修订版: B, 档案已发布: Apr 22, 2013
This application note discusses the use of the ADC0808/ADC0809 Data Acquisition Devices (DAD) withan 8-channel analog multiplexer. - Audio Applications of Linear Integrated CircuitsPDF, 272 Kb, 档案已发布: May 2, 2004
- AN-298 Isolation Techniques for Signal Conditioning (Rev. B)PDF, 685 Kb, 修订版: B, 档案已发布: May 6, 2013
This application note provides information and examples of isolation techniques for signal conditioning. - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, 修订版: B, 档案已发布: Apr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
模型线
系列: LM10 (5)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps