Datasheet Texas Instruments SN74CBTS6800DGVR — 数据表
| 制造商 | Texas Instruments |
| 系列 | SN74CBTS6800 |
| 零件号 | SN74CBTS6800DGVR |
具有预充电输出和肖特基二极管钳位的10位FET总线开关24-TVSOP -40至85
数据表
10-Bit FET Bus Switch With Precharged Outputs And Schottky Diode Clamping datasheet
PDF, 730 Kb, 修订版: C, 档案已发布: Oct 20, 2000
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 24 |
| Package Type | DGV |
| Industry STD Term | TVSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | CS6800 |
| Width (mm) | 4.4 |
| Length (mm) | 5 |
| Thickness (mm) | 1.05 |
| Pitch (mm) | .4 |
| Max Height (mm) | 1.2 |
| Mechanical Data | 下载 |
参数化
| Additional Features | Pre-charged signal path, Schottky clamp diode to prevent undershoot |
| Bandwidth | 200 MHz |
| Configuration | 1:1 SPST |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 128 mA |
| Input/Output OFF-state Capacitance(Typ) | 4.5 pF |
| Number of Channels | 10 |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TVSOP |
| Package Size: mm2:W x L | 24TVSOP: 32 mm2: 6.4 x 5(TVSOP) PKG |
| Rating | Catalog |
| Ron(Max) | 20 Ohms |
| Ron(Typ) | 3 Ohms |
| Supply Current(Max) | 2500 uA |
| Supply Current(Typ) | 2.5 uA |
| Supply Range | 5.5 Max |
| VIH(Min) | 2 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 5.5 V |
| Vdd(Min) | 4 V |
| Vss(Max) | N/A V |
| Vss(Min) | N/A V |
生态计划
| RoHS | Compliant |
应用须知
- FET Switches in Docking StationsPDF, 92 Kb, 档案已发布: Jul 23, 2003
Docking stations for portable electronics require the capability to connect a system with a live-running bus to a disabled or powered-down system. This hot-docking event must not cause any electrical damage, electrical signal glitches, or data corruption. This application report explains the use of TI FET bus-switch products with precharge to accomplish this connection. - Flexible Voltage-Level Translation With CBT Family DevicesPDF, 40 Kb, 档案已发布: Jul 20, 1999
Voltage translation between buses with incompatible logic levels can be accomplished using Texas Instruments (TI) translation-voltage clamps (TVC) or standard crossbar technology (CBT) devices. CBT devices in this application offer flexibility in designs, protection of circuits that are sensitive to high-state voltage-level overshoots, and cost efficiency. - 5-V To 3.3-V Translation With the SN74CBTD3384 (Rev. B)PDF, 35 Kb, 修订版: B, 档案已发布: Mar 1, 1997
The emergence of low-voltage technology required existing 5-V systems to interact with 3.3-V systems. Compatibility issues of mixed-mode operation created the need for 5-V to 3.3-V translation. Buffers and transceivers serve as effective translators. While providing additional drive, these devices also add propagation delay and require directional control. In cases where additional drive is not - 3.3-V to 2.5-V Translation with Texas Instruments Crossbar Technology (Rev. A)PDF, 32 Kb, 修订版: A, 档案已发布: Apr 3, 1998
- VOLTAGE LEVEL TRANSLATION (SL) - FamilyPDF, 111 Kb, 档案已发布: Sep 21, 2011
- Bus FET Switch Solutions for Live Insertion ApplicationsPDF, 300 Kb, 档案已发布: Feb 7, 2003
In today?s competitive computing and networking industry, any equipment downtime due to component interconnects or bus failures impedes communication, hinders productivity and hampers financial growth. In recognizing this increasingly costly unplanned downtime, the industry introduced live-insertion technology to minimize the impact of any such failures. The live-insertion feature enables a networ
模型线
系列: SN74CBTS6800 (2)
- SN74CBTS6800DGVR SN74CBTS6800PWR
制造商分类
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes