Datasheet Texas Instruments LM3492MH/NOPB — 数据表
| 制造商 | Texas Instruments |
| 系列 | LM3492 |
| 零件号 | LM3492MH/NOPB |
具有升压转换器和快速电流调节器的两通道独立可调光LED驱动器20-HTSSOP -40至125
数据表
LM3492/-Q1 Two-Channel Individual Dimmable LED Driver With Boost Converter and Fast Current Regulator datasheet
PDF, 1.4 Mb, 修订版: D, 档案已发布: Oct 31, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 20 | 20 |
| Package Type | PWP | PWP |
| Industry STD Term | HTSSOP | HTSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 73 | 73 |
| Carrier | TUBE | TUBE |
| Device Marking | MH | LM3492 |
| Width (mm) | 4.4 | 4.4 |
| Length (mm) | 6.5 | 6.5 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | 下载 | 下载 |
参数化
| Dimming Method | PWM |
| Input Voltage | DC/DC Type |
| Iout(Max) | 0.2 A |
| Iq(Typ) | 3.6 mA |
| Operating Temperature Range | -40 to 125 C |
| Package Group | HTSSOP |
| Package Size: mm2:W x L | 20HTSSOP: 42 mm2: 6.4 x 6.5(HTSSOP) PKG |
| Power Factor Correction | N/A Min |
| Rating | Catalog |
| Regulated Outputs | 2 |
| Special Features | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Power Good,Soft Start,Thermal Shutdown |
| Switching Frequency(Max) | 1000 kHz |
| Switching Frequency(Min) | 200 kHz |
| Topology | Boost,Boost with Current Sink,Multi-Channel |
| Type | Converter,Inductive,Linear |
| Vin(Max) | 65 V |
| Vin(Min) | 4.5 V |
| Vout(Max) | 65 V |
| Vout(Min) | 5 V |
| Vref | 1.25 V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: LM3492AR111DEMO
LM3492 AR111 LED Bulb Replacement Reference Board
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LM3492EVAL
Two Channel Boost Regulator with DHC for LED Backlighting Evaluation Board
Lifecycle Status: Active (Recommended for new designs)
应用须知
- AN-2192 LM3492 12VAC, 7W LED Driver for AR111 Application (Rev. A)PDF, 627 Kb, 修订版: A, 档案已发布: May 1, 2013
The LM3492 demonstration board included in this package is designed for converting nominal 12VACfrom electronic transformer output to drive seven series connected LEDs at 360mA average current. Theend user can directly light up a LED string through the demonstration board from an electronic transformerto test out the performance. With the demonstration board, the LED string not only runs at - AN-1656 Design Challenges of Switching LED Drivers (Rev. A)PDF, 171 Kb, 修订版: A, 档案已发布: May 3, 2013
Using a switching regulator as an LED driver requires the designer to convert a voltage regulator into acurrent regulator. Beyond the challenge of changing the feedback system to control current, the LEDsthemselves present a load characteristic that is much different than the digital devices and other loads thatrequire constant voltage. The LED WEBENCHВ® online design environment predicts and
模型线
系列: LM3492 (2)
- LM3492MH/NOPB LM3492MHX/NOPB
制造商分类
- Semiconductors > Power Management > LED Driver > Illumination & General Lighting LED Driver