Datasheet Texas Instruments TPS60210DGSG4 — 数据表

具有超低工作电流的稳压3.3V 100mA低纹波电荷泵10-VSSOP -40至85

数据表

PDF, 1.0 Mb, 档案已发布: Jun 20, 2000

从文件中提取

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

Iout(Max)	0.1 A
Iq(Typ)	0.002 mA
Operating Temperature Range	-40 to 85 C
Package Group	VSSOP
Rating	Catalog
Regulated Outputs	1
Special Features	Frequency Synchronization
Switching Frequency(Max)	400 kHz
Switching Frequency(Min)	200 kHz
Type	Charge Pump
Vin(Max)	3.6 V
Vin(Min)	1.8 V
Vout(Max)	3.3 V
Vout(Min)	3.3 V

RoHS

Compliant

Evaluation Modules & Boards: TPS60210EVM-167
Evaluation module for 2 battery cells to 3.3V, 100mA ultra-low operating current charge pump
Lifecycle Status: Active (Recommended for new designs)
- 下载

下载
Optimizing Resistor Dividers at a Comparator (Rev. A)
PDF, 120 Kb, 修订版: A, 档案已发布: Jun 3, 2013
下载
Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
下载
Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
PDF, 130 Kb, 档案已发布: Sep 19, 2011
下载
Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

系列: TPS60210 (4)

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)