Datasheet Texas Instruments LM3549SQ/NOPB — 数据表

LM3549
www.ti.com SNVS640A – AUGUST 2010 – REVISED MAY 2013 LM3549 High Power Sequential LED Driver
Check for Samples: LM3549 FEATURES DESCRIPTION The LM3549 is a high power LED driver with up to
700mA output current. It has three constant current
LED drivers and a buck boost SMPS for driving RGB
LEDs with high efficiency. LED drivers are designed
for sequential drive so only one driver can be enabled
at a time. 1 2 Over-Current Protection
Over-Temperature Protection
I2C Compatible Interface
Under-Voltage Lockout
LED Open and Short Protection and Detection
95% Peak Efficiency Buck-Boost Converter
NVM Memory for Calibration Data and
Standalone Usage without I2C Control
Soft Start LED driver output current settings can be stored to
integrated non-volatile memory which allows standalone operation without I2C interface. Non-volatile
memory is rewritable so current setting can be
changed if needed.
The LM3549 has a fault detection feature that can
detect several different fault conditions. In case of a
fault error flags are set and FAULT output sends
interrupt to control logic. Error flags can be read …