PDF, 82 Kb, 修订版: F, 档案已发布: Jun 27, 2019
PDF, 509 Kb, 修订版: A, 档案已发布: Jun 4, 2008
PDF, 284 Kb, 修订版: A, 档案已发布: May 5, 2013
When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
PDF, 685 Kb, 修订版: B, 档案已发布: May 6, 2013
This application note provides information and examples of isolation techniques for signal conditioning.
PDF, 82 Kb, 修订版: B, 档案已发布: May 5, 2013
This application report discusses improving power supply reliability with IC power regulators.
PDF, 300 Kb, 修订版: B, 档案已发布: May 6, 2013
This application note discusses the operation and compensation of linear regulators.
PDF, 814 Kb, 修订版: A, 档案已发布: May 6, 2013
The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
PDF, 314 Kb, 修订版: B, 档案已发布: May 5, 2013
Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
PDF, 282 Kb, 档案已发布: Apr 11, 2014
PDF, 197 Kb, 档案已发布: Oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
PDF, 966 Kb, 修订版: B, 档案已发布: May 5, 2013
This application report discusses how a super matched bipolar transistor pair sets new standards for driftand noise.
PDF, 262 Kb, 修订版: B, 档案已发布: May 6, 2013
Of all common environmental parameters humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods albeit highly accurate are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas including food processing paper and lumber production pollution monitor
PDF, 479 Kb, 档案已发布: May 2, 2004
Application Note 127 LM143 Monolithic High Voltage Operational Amplifier Applications
PDF, 684 Kb, 修订版: B, 档案已发布: May 6, 2013
The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example.
PDF, 47 Kb, 修订版: B, 档案已发布: May 6, 2013
This application note discusses the PNP voltage regulator.
PDF, 75 Kb, 档案已发布: May 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.