Datasheet Texas Instruments TPS54020RUWR — 数据表

制造商Texas Instruments
系列TPS54020
零件号TPS54020RUWR
Datasheet Texas Instruments TPS54020RUWR

具有异相同步的4.5V至17V输入,10A同步降压SWIFT™转换器15-VQFN-HR -40至150

数据表

TPS54020 Small, 10-A, 4.5-V to 17-V Input, SWIFTв„ў Synchronous Step-Down Converter With Light-Load Efficiency datasheet
PDF, 2.3 Mb, 修订版: D, 档案已发布: Dec 12, 2014
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin15
Package TypeRUW
Industry STD TermVQFN-HR
JEDEC CodeS-PQFP-N
Package QTY3000
CarrierLARGE T&R
Device Marking54020
Width (mm)3.5
Length (mm)3.5
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical Data下载

参数化

Control ModeCurrent Mode
Duty Cycle(Max)98 %
Iout(Max)10 A
Iq(Typ)0.6 mA
Operating Temperature Range-40 to 150 C
Package GroupVQFN-HR
RatingCatalog
Regulated Outputs1
Special FeaturesAdjustable Current Limit,Enable,Frequency Synchronization,Light Load Efficiency,Phase Interleaving,Power Good,Pre-Bias Start-Up,Synchronous Rectification,Tracking
Switching Frequency(Max)1200 kHz
Switching Frequency(Min)200 kHz
TypeConverter
Vin(Max)17 V
Vin(Min)4.5 V
Vout(Max)5 V
Vout(Min)0.6 V

生态计划

RoHSCompliant
Pb FreeYes

设计套件和评估模块

  • Evaluation Modules & Boards: TPS54020EVM-082
    10A Synchronous Step-Down SWIFTВ™ Converter Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Designing a negative boost converter from a standard positive buck converter
    PDF, 267 Kb, 档案已发布: Apr 16, 2013
  • HotRod QFN Application Note
    PDF, 356 Kb, 档案已发布: Apr 9, 2014
    HotRod Quad flatpack No Leads (QFN) are leadless packages specifically designed for power applications. The small footprint, standard QFN pitch, low parasitics along with high current capability of these packages are ideal for power converters application. The electrical connections are made via lands on the bottom side of the component to the surface of the connecting substrate (PCB). This applic
  • Calculating Efficiency
    PDF, 175 Kb, 档案已发布: Feb 19, 2010
    This application report provides a step-by-step procedure for calculating buck converter efficiency and power dissipation at operating points not provided by the data sheet.
  • 2Q 2013 Issue Analog Applications Journal
    PDF, 2.5 Mb, 档案已发布: Apr 16, 2013
  • SMT Guidelines for Stacked Inductor (Inductor On Top) on Voltage Regulator IC
    PDF, 409 Kb, 档案已发布: Feb 22, 2016
  • Understanding Thermal Dissipation and Design of a Heatsink
    PDF, 59 Kb, 档案已发布: May 4, 2011
    Power dissipation performance must be well understood prior to integrating devices on a printed-circuit board (PCB) to ensure that any given device is operated within its defined temperature limits. When a device is running, it consumes electrical energy that is transformed into heat. Most of the heat is typically generated by switching devices like MOSFETs, ICs, etc. This application report discu
  • Semiconductor and IC Package Thermal Metrics (Rev. C)
    PDF, 201 Kb, 修订版: C, 档案已发布: Apr 19, 2016

模型线

系列: TPS54020 (2)

制造商分类

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)