Datasheet Texas Instruments LMV981MG — 数据表
| 制造商 | Texas Instruments |
| 系列 | LMV981-N |
| 零件号 | LMV981MG |
具有关断功能的单个1.8V RRIO运算放大器6-SC70 -40至125
数据表
LMV98x-N Small, Low-Power, 1.8-V RRIO Operational Amplifiers With Shutdown datasheet
PDF, 1.6 Mb, 修订版: M, 档案已发布: Sep 30, 2016
从文件中提取
价格
状态
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 6 |
| Package Type | DCK |
| Industry STD Term | SOT-SC70 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | A77 |
| Width (mm) | 1.25 |
| Length (mm) | 2 |
| Thickness (mm) | .9 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | 下载 |
替代品
| Replacement | LMV981MG/NOPB |
| Replacement Code | S |
参数化
| Additional Features | Shutdown |
| Approx. Price (US$) | 0.36 | 1ku |
| Architecture | Bipolar |
| CMRR(Min)(dB) | 60 |
| CMRR(Typ)(dB) | 86 |
| GBW(Typ)(MHz) | 1.5 |
| Input Bias Current(Max)(pA) | 35000 |
| Iq per channel(Max)(mA) | 0.23 |
| Iq per channel(Typ)(mA) | 0.116 |
| Number of Channels(#) | 1 |
| Offset Drift(Typ)(uV/C) | 5.5 |
| Operating Temperature Range(C) | -40 to 125 |
| Output Current(Typ)(mA) | 65 |
| Package Group | SC70 |
| Package Size: mm2:W x L (PKG) | See datasheet (DSBGA) |
| Rail-to-Rail | In Out |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 0.42 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 5 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 1.8 |
| Vn at 1kHz(Typ)(nV/rtHz) | 50 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 4 |
生态计划
| RoHS | TBD |
| Pb Free | No |
应用须知
- AN-1684 Saving Power in an AC-Coupled Amplifier Circuit (Rev. A)PDF, 99 Kb, 修订版: A, 档案已发布: Apr 26, 2013
AC-coupled circuits are often used for single supply operation to bring the input voltage into the inputrange of the amplifier. This circuit topology can be used in AC smoke detectors or in AC proximitysensors. - AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)PDF, 165 Kb, 修订版: A, 档案已发布: Apr 26, 2013
It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
模型线
系列: LMV981-N (8)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps