Datasheet Texas Instruments SN74LVC06APWRE4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | SN74LVC06A |
| 零件号 | SN74LVC06APWRE4 |
具有漏极开路输出的六路反相器缓冲器/驱动器14-TSSOP -40至125
数据表
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 14 |
| Package Type | PW |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | LC06A |
| Width (mm) | 4.4 |
| Length (mm) | 5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | 下载 |
参数化
| Bits | 6 |
| F @ Nom Voltage(Max) | 100 Mhz |
| ICC @ Nom Voltage(Max) | 0.04 mA |
| Operating Temperature Range | -40 to 125 C |
| Output Drive (IOL/IOH)(Max) | -24/24 mA |
| Package Group | TSSOP |
| Package Size: mm2:W x L | 14TSSOP: 32 mm2: 6.4 x 5(TSSOP) PKG |
| Rating | Catalog |
| Schmitt Trigger | No |
| Technology Family | LVC |
| VCC(Max) | 3.6 V |
| VCC(Min) | 1.65 V |
| Voltage(Nom) | 1.8,2.5,2.7,3.3 V |
| tpd @ Nom Voltage(Max) | 5.6,3.1,3.9,3.7 ns |
生态计划
| RoHS | Compliant |
应用须知
- LVC07A: Applications Of An Open-Drain Hex Buffer And Discussion Of Char ResultsPDF, 51 Kb, 档案已发布: Apr 8, 1999
The Texas Instruments (TI) LVC07A hex buffer, with open-drain outputs, and its inverting counterpart, LVC06A, operate in the 1.65-V to 3.6-V VCC range, but can accept input voltages up to 5.5 V. Laboratory results show superior propagation times versus competitors, natural Ioff protection, and output-breakdown capability versus a competitor. Applications of the LVC07A and LVC06A include bus-conte - LVC Characterization InformationPDF, 114 Kb, 档案已发布: Dec 1, 1996
This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices. - Use of the CMOS Unbuffered Inverter in Oscillator CircuitsPDF, 796 Kb, 档案已发布: Nov 6, 2003
CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly - Power-Up 3-State (PU3S) Circuits in TI Standard Logic DevicesPDF, 209 Kb, 档案已发布: May 10, 2002
Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features
模型线
系列: SN74LVC06A (20)
制造商分类
- Semiconductors > Logic > Buffer/Driver/Transceiver > Inverting Buffer/Driver