Datasheet Texas Instruments TPS62353YZGT — 数据表

制造商Texas Instruments
系列TPS62353
零件号TPS62353YZGT
Datasheet Texas Instruments TPS62353YZGT

具有I2C的1A,3MHz降压转换器,用于动态电压缩放12-DSBGA -40至85

数据表

800-mA 3-MHz Synchronous Step-Down Converter With I2C(TM) Compatible Interface datasheet
PDF, 1.6 Mb, 修订版: E, 档案已发布: Apr 15, 2008
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin12
Package TypeYZG
Industry STD TermDSBGA
JEDEC CodeR-XBGA-N
Package QTY250
CarrierSMALL T&R
Device MarkingTPS62353
Thickness (mm).375
Pitch (mm).5
Max Height (mm).625
Mechanical Data下载

参数化

Control ModeVoltage Mode
Duty Cycle(Max)80 %
Iout(Max)0.8 A
Iq(Typ)0.028 mA
Operating Temperature Range-40 to 85 C
Package GroupDSBGA
RatingCatalog
Regulated Outputs1
Special FeaturesDynamic Voltage Scaling,Enable,Frequency Synchronization,Light Load Efficiency,Output Discharge,Synchronous Rectification
Switching Frequency(Max)3350 kHz
Switching Frequency(Min)2650 kHz
TypeConverter
Vin(Max)5.5 V
Vin(Min)2.7 V
Vout(Max)1.5375 V
Vout(Min)0.75 V

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: TMDSCSK8127
    TMS320DM8127 Camera Starter Kit (CSK)
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Using The TPS6235x Without The I2C Interface
    PDF, 69 Kb, 档案已发布: May 17, 2007
    The TPS6235x series of DC/DC converters have an I2C-compatible interface that facilitates changing the output voltage for dynamic voltage-scaling applications. However, it is possible to use the TPS6235x series of converters, without the I2C interface, as a standalone DC/DC converter that can be dynamically switched between two fixed voltages. This technique does not work for the TPS62351.
  • Power Solution Using Discrete DC/DC Converters and LDOs (Rev. B)
    PDF, 299 Kb, 修订版: B, 档案已发布: Aug 26, 2010
  • Powering OMAP3 With TPS6235x: Design-In Guide
    PDF, 296 Kb, 档案已发布: Dec 3, 2008
    The OMAP35xx Applications Processors have a diverse set of power management features which potentially enable lower cost power solutions based on your application. This design-in guide describes a power solution based on the TPS6235x device. This guide can be used to evaluate this solution for your design or help you make decisions when designing in this solution.
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
  • Five steps to a great PCB layout for a step-down converter
    PDF, 162 Kb, 档案已发布: Jan 29, 2015
  • Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)
    PDF, 755 Kb, 修订版: A, 档案已发布: Jan 13, 2012
  • Testing tips for applying external power to supply outputs without an input volt
    PDF, 110 Kb, 档案已发布: Oct 24, 2016
  • Basic Calculation of a Buck Converter's Power Stage (Rev. B)
    PDF, 202 Kb, 修订版: B, 档案已发布: Aug 17, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, 档案已发布: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

模型线

系列: TPS62353 (2)

制造商分类

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)