Datasheet Texas Instruments TPS60100PWPRG4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | TPS60100 |
| 零件号 | TPS60100PWPRG4 |
稳压3.3V大功率低噪声电荷泵DC / DC转换器20-HTSSOP -40至85
数据表
Regulated 3.3-V 200-mA Low-Noise Charge Pump DC/DC Converter datasheet
PDF, 1.0 Mb, 修订版: C, 档案已发布: Aug 7, 2008
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 20 |
| Package Type | PWP |
| Industry STD Term | HTSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | TPS60100 |
| Width (mm) | 4.4 |
| Length (mm) | 6.5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | 下载 |
参数化
| Iout(Max) | 0.2 A |
| Iq(Typ) | 0.05 mA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | HTSSOP |
| Rating | Catalog |
| Regulated Outputs | 1 |
| Special Features | Enable,Frequency Synchronization |
| Switching Frequency(Max) | 400 kHz |
| Switching Frequency(Min) | 200 kHz |
| Type | Charge Pump |
| Vin(Max) | 3.6 V |
| Vin(Min) | 1.8 V |
| Vout(Max) | 3.3 V |
| Vout(Min) | 3.3 V |
生态计划
| RoHS | Compliant |
应用须知
- Additional Negative Output with TPS601xxPDF, 64 Kb, 档案已发布: Mar 26, 2001
In addition to a main positive supply voltage, some applications also require a negative voltage at low current. The power-supply circuit should easily be able to provide the application with this additional supply voltage. This note discusses a simple way to derive a negative voltage from a charge pump dc/dc converter. An easy solution to stabilize the negative voltage is to use a shunt regulator - Powering the TMS320VC5402 DSP Using the TPS60100, TPS76918, and the TPS3305-18PDF, 61 Kb, 档案已发布: Dec 16, 1999
This report analyzes a low-cost, low-power supply design utilizing the TPS60100 dc-to-dc converter, the TPS76918 series regulator, and the TPS3305-18 power-supply supervisor to power DSP applications. - TPS6010x/TPS6011x Charge Pump (Rev. A)PDF, 391 Kb, 修订版: A, 档案已发布: Dec 16, 1999
Charge pumps are dc/dc converters that use a capacitor instead of an inductor or transformer for energy storage. They are able to generate positive or negative voltages from the input voltage. The input voltage can be multiplied by some factor such as 0.5, 2, 3, and so on, to generate the output voltage desired. Often, charge pumps and all related parts (including those used for energy storage) ar - PowerPAD Thermally Enhanced Package (Rev. H)PDF, 983 Kb, 修订版: H, 档案已发布: Jul 6, 2018
- Extending the Soft Start Time Without a Soft Start Pin (Rev. B)PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
模型线
系列: TPS60100 (3)
- TPS60100PWP TPS60100PWPR TPS60100PWPRG4
制造商分类
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)