Datasheet Texas Instruments LM3102QMHX/NOPB — 数据表

制造商	Texas Instruments
系列	LM3102-Q1
零件号	LM3102QMHX/NOPB

同步1MHz 2.5A降压稳压器20-HTSSOP -40至125

数据表

下载

PDF, 1.5 Mb, 修订版: H, 档案已发布: Jun 30, 2015

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

打包

Pin	20	20
Package Type	PWP	PWP
Industry STD Term	HTSSOP	HTSSOP
JEDEC Code	R-PDSO-G	R-PDSO-G
Package QTY	2500	2500
Carrier	LARGE T&R	LARGE T&R
Device Marking	QMH	LM3102
Width (mm)	4.4	4.4
Length (mm)	6.5	6.5
Thickness (mm)	1	1
Pitch (mm)	.65	.65
Max Height (mm)	1.2	1.2
Mechanical Data	下载	下载

参数化

Control Mode	COT with emulated ripple
Duty Cycle(Max)	94 %
Iout(Max)	2.5 A
Iq(Typ)	1 mA
Operating Temperature Range	-40 to 125 C
Package Group	HTSSOP
Rating	Automotive
Regulated Outputs	1
Special Features	Enable,Synchronous Rectification
Switching Frequency(Max)	1000 kHz
Switching Frequency(Min)	200 kHz
Type	Converter
Vin(Max)	42 V
Vin(Min)	4.5 V
Vout(Max)	7 V
Vout(Min)	0.8 V

生态计划

RoHS

Compliant

设计套件和评估模块

Evaluation Modules & Boards: LM3102EVAL
SIMPLE SWITCHERВ® Synchronous 1MHz 2.5A Step-Down Voltage Regulator Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- 下载

应用须知

下载
AN-643 EMI/RFI Board Design (Rev. B)
PDF, 742 Kb, 修订版: B, 档案已发布: May 3, 2004
Application Note 643 EMI/RFI Board Design
下载
Input and Output Capacitor Selection
PDF, 219 Kb, 档案已发布: Sep 19, 2005
下载
AN-1197 Selecting Inductors for Buck Converters (Rev. B)
PDF, 558 Kb, 修订版: B, 档案已发布: Apr 23, 2013
This application report provides design information to help select an off-the-shelf inductor for anycontinuous-mode buck converter application.
下载
AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)
PDF, 3.6 Mb, 修订版: A, 档案已发布: Apr 23, 2013
This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor.
下载
AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)
PDF, 1.4 Mb, 修订版: A, 档案已发布: Apr 23, 2013
This application note provides thermal power analysis techniques for analyzing the power IC.
下载
AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
PDF, 2.7 Mb, 修订版: A, 档案已发布: Apr 23, 2013
This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
下载
Semiconductor and IC Package Thermal Metrics (Rev. C)
PDF, 201 Kb, 修订版: C, 档案已发布: Apr 19, 2016
下载
AN-2218 Precision Current Limiting with the LMP8646 and LM3102 (Rev. A)
PDF, 109 Kb, 修订版: A, 档案已发布: Apr 23, 2013
This application report discusses how to design the Texas Instruments LMP8646 with the LM3102 voltageregulator and a supercap load application.
下载
Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)
PDF, 512 Kb, 修订版: A, 档案已发布: Sep 12, 2014
Printed Circuit Board (PCB) layout for Switched Mode Power Supplies (SMPS) is critical to achieve proper converter operation good thermal performance and excellent radiated EMI performance. Optimized board layout for low radiated EMI is made very simple by the package and pin arrangement of the SIMPLE SWITCHER Synchronous Buck Converter family LM4360x and LM4600x
下载
AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)
PDF, 82 Kb, 修订版: C, 档案已发布: Apr 23, 2013
When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current
下载
AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)
PDF, 374 Kb, 修订版: C, 档案已发布: Apr 23, 2013
This application report provides SIMPLE SWITCHER™ PCB layout guidelines.
下载
AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)
PDF, 2.5 Mb, 修订版: C, 档案已发布: Apr 24, 2013
Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti
下载
AN-2200 Precision Current Limiting with the LMP8646 and LMZ12003 (Rev. A)
PDF, 94 Kb, 修订版: A, 档案已发布: Apr 23, 2013
This application report discusses how to design the Texas Instruments LMP8646 with the LMZ12003voltage regulator and a resistive load application.
下载
AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)
PDF, 427 Kb, 修订版: C, 档案已发布: Apr 23, 2013
This application note discusses stresses in wide input DC-DC converters.
下载
AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)
PDF, 9.2 Mb, 修订版: B, 档案已发布: Apr 23, 2013
This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP

模型线

系列: LM3102-Q1 (2)

LM3102QMH/NOPB LM3102QMHX/NOPB

制造商分类

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)