Datasheet Texas Instruments LMH6611MKE/NOPB — 数据表
| 制造商 | Texas Instruments |
| 系列 | LMH6611 |
| 零件号 | LMH6611MKE/NOPB |
单电源345 MHz轨至轨输出放大器6-SOT-23-THIN -40至125
数据表
LMH6611/LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers datasheet
PDF, 2.6 Mb, 修订版: K, 档案已发布: Oct 9, 2013
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 6 |
| Package Type | DDC |
| Industry STD Term | SOT-23-THIN |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | AX4A |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | .87 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.1 |
| Mechanical Data | 下载 |
参数化
| 2nd Harmonic | 82 dBc |
| 3rd Harmonic | 80 dBc |
| @ MHz | 5 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 365 MHz |
| CMRR(Min) | 79 dB |
| CMRR(Typ) | 98 dB |
| GBW(Typ) | 365 MHz |
| Input Bias Current(Max) | 10100000 pA |
| Iq per channel(Max) | 3.8 mA |
| Iq per channel(Typ) | 3.3 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 4 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 120 mA |
| Package Group | SOT-23-THIN |
| Package Size: mm2:W x L | 6SOT-23-THIN: 8 mm2: 2.8 x 2.9(SOT-23-THIN) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 460 V/us |
| Total Supply Voltage(Max) | 11 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 10 nV/rtHz |
| Vn at Flatband(Typ) | 10 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 1.5 mV |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: 551600083-001
Single to Single ADC Driver PCB for LMH6611 and LMH6618 (SOT23 package, unstuffed)
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730216
Evaluation Board for High-Speed Single Op Amp in the 5- 6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs)
应用须知
- AN-1803 Design Considerations for a Transimpedance Amplifier (Rev. A)PDF, 103 Kb, 修订版: A, 档案已发布: May 1, 2013
It is challenging to design a good current-to-voltage (transimpedance) converter using a voltage-feedbackamplifier (VFA). By definition, a photodiode produces either a current or voltage output from exposure tolight. The transimpedance amplifier (TIA) is utilized to convert this low-level current to a usable voltagesignal and the TIA often needs to be compensated for proper operation. This a
模型线
系列: LMH6611 (3)
- LMH6611MK/NOPB LMH6611MKE/NOPB LMH6611MKX/NOPB
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)