Datasheet Texas Instruments LMC6482AIN/NOPB — 数据表

制造商Texas Instruments
系列LMC6482
零件号LMC6482AIN/NOPB
Datasheet Texas Instruments LMC6482AIN/NOPB

超低偏置电流,精密CMOS轨至轨输入和输出运算放大器8-PDIP -40至85

数据表

LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplifier datasheet
PDF, 2.9 Mb, 修订版: E, 档案已发布: Apr 24, 2015
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin88
Package TypePP
Industry STD TermPDIPPDIP
JEDEC CodeR-PDIP-TR-PDIP-T
Package QTY4040
CarrierTUBETUBE
Device Marking82AINLMC64
Width (mm)6.356.35
Length (mm)9.819.81
Thickness (mm)3.93.9
Pitch (mm)2.542.54
Max Height (mm)5.085.08
Mechanical Data下载下载

参数化

Additional FeaturesN/A
ArchitectureCMOS
CMRR(Min)65 dB
CMRR(Typ)82 dB
GBW(Typ)1.5 MHz
Input Bias Current(Max)4 pA
Iq per channel(Max)0.7 mA
Iq per channel(Typ)0.5 mA
Number of Channels2
Offset Drift(Typ)1 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)30 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailIn,Out
RatingCatalog
Slew Rate(Typ)1.3 V/us
Total Supply Voltage(Max)15.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)3 +5V=5, +/-5V=10
Vn at 1kHz(Typ)37 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)0.75 mV

生态计划

RoHSCompliant

应用须知

  • AN-1237 RSDSв„ў Flat Panel Display Design Guidelines Part 2 (Rev. A)
    PDF, 194 Kb, 修订版: A, 档案已发布: May 6, 2013
    This application report presents part 2 of the flat panel display design guidelines.
  • Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    PDF, 81.7 Mb, 修订版: B, 档案已发布: Apr 22, 2013
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
  • AN-1234 RSDSв„ў Flat Panel Display Design Guidelines Part 1 (Rev. A)
    PDF, 245 Kb, 修订版: A, 档案已发布: May 6, 2013
    This application report outlines the total system solution that Texas Instruments provides for flat panel displays (FPDs). The described design uses an reduced swing differential signaling (RSDS) interface technology for reduced power, reduced board size, reduced component count, and reduced EMI. This document is currently applicable to XGA and SXGA notebook and monitor applications.
  • AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)
    PDF, 165 Kb, 修订版: A, 档案已发布: Apr 26, 2013
    It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps