Datasheet Texas Instruments TS5A3159DCKTG4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | TS5A3159 |
| 零件号 | TS5A3159DCKTG4 |
1欧姆SPDT模拟开关6-SC70 -40至85
数据表
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 6 | 6 | 6 |
| Package Type | DCK | DCK | DCK |
| Industry STD Term | SOT-SC70 | SOT-SC70 | SOT-SC70 |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R | SMALL T&R |
| Device Marking | JAZ | JAK | JAR |
| Width (mm) | 1.25 | 1.25 | 1.25 |
| Length (mm) | 2 | 2 | 2 |
| Thickness (mm) | .9 | .9 | .9 |
| Pitch (mm) | .65 | .65 | .65 |
| Max Height (mm) | 1.1 | 1.1 | 1.1 |
| Mechanical Data | 下载 | 下载 | 下载 |
参数化
| Additional Features | Break-before-make |
| Bandwidth | 100 MHz |
| Bandwidth(Max) | 100 MHz |
| Configuration | 2:1 SPDT |
| ESD Charged Device Model | 1 kV |
| ESD HBM | 2 kV |
| Input/Ouput Voltage(Max) | 5.5 V |
| Input/Output Continuous Current(Max) | 200 mA |
| Input/Output OFF-state Capacitance(Typ) | 23 pF |
| Input/Output ON-state Capacitance(Typ) | 84 pF |
| Number of Channels | 1 |
| OFF-state leakage current(Max) | 0.02 µA |
| ON-state leakage current(Max) | 0.04 µA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SC70 |
| Package Size: mm2:W x L | 6SC70: 4 mm2: 2.1 x 2(SC70) PKG |
| Rating | Catalog |
| Ron(Max) | 3.2 Ohms |
| Ron(Typ) | 0.75 Ohms |
| Supply Current(Max) | 0.1 uA |
| Supply Current(Typ) | 0.01 uA |
| Supply Range | 5.5 Max |
| VIH(Min) | 1.5 V |
| VIL(Max) | 0.8 V |
| Vdd(Max) | 5.5 V |
| Vdd(Min) | 1.65 V |
| Vss(Max) | N/A V |
| Vss(Min) | N/A V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Development Kits: CC2650STK
SimpleLinkВ™ Bluetooth low energy/Multi-standard SensorTag
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Accurately measuring ADC driving-circuit settling time (Rev. A)PDF, 107 Kb, 修订版: A, 档案已发布: May 18, 2015
- Using ADS8411 in a Multiplexed Analog Input Application (Rev. A)PDF, 2.1 Mb, 修订版: A, 档案已发布: Feb 15, 2006
This application report is intended as a guide for using an analog multiplexer to multiplex several input signals to a single high-resolution, high-speed SAR analog-to-digital converter (ADC). The ADC and the multiplexer used were the ADS8411 and the TS5A3159/3359, respectively. This document discusses the important parameters of a multiplexer and defines a few important measurements for evaluatin - Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, 档案已发布: Jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
模型线
系列: TS5A3159 (11)
制造商分类
- Semiconductors > Switches and Multiplexers > Analog Switches/Muxes