Datasheet Texas Instruments TL5001ID — 数据表

制造商	Texas Instruments
系列	TL5001
零件号	TL5001ID

数据表

价格

状态

打包

参数化

生态计划

设计套件和评估模块

• Evaluation Modules & Boards: TL5001EVM-097
  PWM Buck Controller with Selectable 3.3V or 5V Output
  Lifecycle Status: Active (Recommended for new designs)
  
  • 下载

应用须知

• 下载
  Examples Of Applications With The Pulse Width Modulator TL5001
  PDF, 462 Kb, 档案已发布: Jan 1, 1997
  Switched-mode techniques are used more and more nowadays for the design of power supplies. Switch mode power supplies have considerably higher efficiency when compared to designs employing linear regulators, and can be used for higher output powers. The rectified input voltage in a switching regulator is chopped by means of a switch. The LC network after the switch smoothes this voltage, resulting
• 下载
  Designing with the TL5001 PWM Controller (Rev. A)
  PDF, 265 Kb, 修订版: A, 档案已发布: Sep 1, 1995
  Electrical and electronic products required to be lighter, smaller, use less power, and cost less. Manufacturers are turning to small high-frequency dc-to-dc converters for the power supply solution. The TL5001, pulse-width modulator (PWM) control integrated circuit, when combined with a few external components, can implement the converters and operate at frequencies to 400 kHz. This document p
• 下载
  Practical Feedback Loop Analysis for Voltage-Mode Boost Converter
  PDF, 559 Kb, 档案已发布: Feb 4, 2014
• 下载
  Off-Line SMPS Failure Modes PWM Switchers and DC-DC Converters
  PDF, 71 Kb, 档案已发布: Mar 22, 2000
  Today's voltage regulator modules (VRMs) employ off-line SMPS techniques. Traditionally, they are usually discarded when they fail because they are so challenging to debug and so inexpensive to replace. Investigation of these failed modules reveals some common failure modes. Some failures are caused by other systems' passive components that fail after repeated electrical stress. Recognizing these
• 下载
  Understanding Buck Power Stages In Switchmode Power Supplies
  PDF, 173 Kb, 档案已发布: Mar 4, 1999
  A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the buck power stage only and does not cover control circuits. Detailed steady-state and small-signal analysis of the buck power stage operating in continuous
• 下载
  Understanding Boost Power Stages In Switchmode Power Supplies
  PDF, 149 Kb, 档案已发布: Mar 4, 1999
  A switching power supply consists of the power stage and the control circuit. The power stage performs the basic power conversion from the input voltage to the output voltage and includes switches and the output filter. This report addresses the boost power stage only and does not cover control circuits. The report includes detailed steady-stage and small-signal analysis of the boost power stage o
• 下载
  Basic Calculation of a Boost Converter's Power Stage (Rev. C)
  PDF, 186 Kb, 修订版: C, 档案已发布: Jan 8, 2014
  This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
• 下载
  Understanding Buck-Boost Power Stages in Switchmode Power Supplies (Rev. A)
  PDF, 363 Kb, 修订版: A, 档案已发布: May 28, 2002

模型线

制造商分类

• Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost or Inverting Controller (External Switch)