Datasheet Texas Instruments AM5K2E02ABDA4 — 数据表
制造商 | Texas Instruments |
系列 | AM5K2E02 |
零件号 | AM5K2E02ABDA4 |
Sitara处理器:双ARM Cortex-A15 1089-FCBGA -40至100
数据表
AM5K2E04/02 Multicore ARM KeyStone II System-on-Chip (SoC) datasheet
PDF, 1.8 Mb, 修订版: D, 档案已发布: Mar 11, 2015
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 1089 | 1089 | 1089 |
Package Type | ABD | ABD | ABD |
Package QTY | 40 | 40 | 40 |
Device Marking | A1.4GHZ | @2012 TI | AM5K2E02ABD |
Width (mm) | 27 | 27 | 27 |
Length (mm) | 27 | 27 | 27 |
Thickness (mm) | 2.98 | 2.98 | 2.98 |
Mechanical Data | 下载 | 下载 | 下载 |
参数化
ARM CPU | 2 ARM Cortex-A15 |
ARM MHz | 1250,1400 Max. |
Applications | Industrial |
DRAM | DDR3,DDR3L |
EMAC | 8-Port 1Gb Switch |
I2C | 3 |
On-Chip L2 Cache | 4096 KB (ARM Cluster) |
Operating Systems | SYS/BIOS,Linux,VxWorks,Integrity |
Operating Temperature Range | 0 to 85,-40 to 100 C |
Other On-Chip Memory | 2048 KB |
PCI/PCIe | 4 PCIe Gen2 |
Rating | Catalog |
SPI | 3 |
Serial I/O | Hyperlink,I2C,SPI,TSIP,UART,USB |
UART | 2 SCI |
USB | 2 |
生态计划
RoHS | Compliant |
设计套件和评估模块
- JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
XDS560v2 System Trace USB & Ethernet Debug Probe
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: XEVMK2EX
K2E Development Board
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
XDS560v2 System Trace USB Debug Probe
Lifecycle Status: Active (Recommended for new designs) - JTAG Emulators/ Analyzers: TMDSEMU200-U
XDS200 USB Debug Probe
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: EVMK2EX
K2E Development Board
Lifecycle Status: Preview (Device has been announced but is not in production. Samples may or may not be available)
应用须知
- Power Consumption Summary for K2E System-on-Chip (SoC) Device FamilyPDF, 65 Kb, 档案已发布: Jun 14, 2017
This application report discusses estimating the power consumption of Texas Instruments' K2Ex Digital Signal Processors (DSP) using a provided device-specific power spreadsheet. It should be noted that the power model is applicable for all silicon revisions. - Clocking Spreadsheet for K2E Device FamilyPDF, 22 Kb, 档案已发布: Jan 26, 2017
This document discusses the internal clocking architecture of Texas Instruments K2Ex Digital Signal Processors (DSP) using a provided clocking spreadsheet.The 66AK2Ex and AM5K2Ex devices have similar internal clocking architecture and peripherals except the corepac. The 66AK2Ex devices have both DSP corepac and ARM corepac, whereas, the AM5K2Ex devices have ARM corepac only.Use the K - Keystone II DDR3 InitializationPDF, 73 Kb, 档案已发布: Jan 26, 2015
This application report provides a step-to-step initialization guide for the Keystone II device DDR3 SDRAM controller. - Throughput Performance Guide for KeyStone II Devices (Rev. B)PDF, 866 Kb, 修订版: B, 档案已发布: Dec 22, 2015
This application report analyzes various performance measurements of the KeyStone II family of processors. It provides a throughput analysis of the various support peripherals to different end-points and memory access. - Keystone II DDR3 Debug GuidePDF, 143 Kb, 档案已发布: Oct 16, 2015
This guide provides tools for use when debugging a failing DDR3 interface on a KeyStone II device. - Power Management of KS2 Device (Rev. C)PDF, 61 Kb, 修订版: C, 档案已发布: Jul 15, 2016
This application report lists the steps to enable Class 0 Temperature Compensation (Class 0 TC) mode of SmartReflexв„ў Subsystem (SRSS) module available on such devices. - Hardware Design Guide for KeyStone II DevicesPDF, 1.8 Mb, 档案已发布: Mar 24, 2014
- PCIe Use Cases for KeyStone DevicesPDF, 320 Kb, 档案已发布: Dec 13, 2011
- The C6000 Embedded Application Binary Interface Migration Guide (Rev. A)PDF, 20 Kb, 修订版: A, 档案已发布: Nov 10, 2010
The C6000 compiler tools support a new ELF-based ABI named EABI. Prior to this time, the compiler only supported a single ABI, which is now named COFF ABI. The following compelling best-in-class features are available under the C6000 EABI:GeneralZero-init globals: “int gvar;” gets set to 0 before main runs.Dynamic linking: Add code to a running system.Native ROM - Clocking Design Guide for KeyStone DevicesPDF, 1.5 Mb, 档案已发布: Nov 9, 2010
- Optimizing Loops on the C66x DSPPDF, 585 Kb, 档案已发布: Nov 9, 2010
- DDR3 Design Requirements for KeyStone Devices (Rev. B)PDF, 582 Kb, 修订版: B, 档案已发布: Jun 5, 2014
- Multicore Programming Guide (Rev. B)PDF, 1.8 Mb, 修订版: B, 档案已发布: Aug 29, 2012
As application complexity continues to grow, we have reached a limit on increasing performance by merely scaling clock speed. To meet the ever-increasing processing demand, modern System-On-Chip solutions contain multiple processing cores. The dilemma is how to map applications to multicore devices. In this paper, we present a programming methodology for converting applications to run on multicore
模型线
系列: AM5K2E02 (5)
- AM5K2E02ABD25 AM5K2E02ABD4 AM5K2E02ABDA25 AM5K2E02ABDA4 AM5K2E02XABD25
制造商分类
- Semiconductors > Processors > Sitara Processors > ARM Cortex-A15 > AM5K2Ex