Datasheet Texas Instruments BQ24314DSJT — 数据表
| 制造商 | Texas Instruments |
| 系列 | BQ24314 |
| 零件号 | BQ24314DSJT |
充电器前端保护IC，具有30V最大VIN和5.85V OVP 12-VSON -40至85
数据表
bq2431x Overvoltage and Overcurrent Protection IC and Li+ Charger Front-End Protection IC datasheet
PDF, 2.2 Mb, 修订版: D, 档案已发布: Apr 29, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 12 |
| Package Type | DSJ |
| Industry STD Term | VSON |
| JEDEC Code | R-PDSO-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | CBX |
| Width (mm) | 4 |
| Length (mm) | 3 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | 下载 |
参数化
| Communication Interface | No Communication |
| Function | Charger Front-End Protection |
| Input Over-Current Protection | 1 A |
| Input Over-Voltage Protection | 5.85 V |
| Number of Series Cells | 1 Min |
| Package Group | VSON |
| Protection Feature | Over-voltage (OV) s |
| Rating | Catalog |
| Special Features | N/A |
| Typical Operating Current(Typ) | 400 uA |
| Vin(Max) | 30 V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: BQ24314EVM
BQ24314 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Battery-charger front-end IC improves charging-system safetyPDF, 199 Kb, 档案已发布: May 16, 2008
- How to Meet 24V Hot Plug-In Test for Charge Front-End bq243xxPDF, 112 Kb, 档案已发布: Jan 2, 2008
The maximum input voltage rating of the bq243xx family of ICs is 30 V. However, some customers like to perform a 24-V hot plug-in transient test to prove its high-voltage capability and reliability from a system level. It is important for system designers to properly design the charging system with correct system-level protections. Usually, a TVS (transient voltage suppression) Zener diode is used - High Voltage Pulse Transient Safety Design fro bq243xxPDF, 611 Kb, 档案已发布: Dec 4, 2007
The maximum input voltage rating of the bq243xx family is 30 V. However, some customers like to do high-voltage pulse transient tests to prove its high-voltage capability and reliability from a system level. This pulse transient voltage could be as high as 45 V with 1-A output current limit and 200-Вµs pulse width. It is important for system designers to properly design the charging system wi - Extending Single Input Charger to Dual Input Applications (Rev. A)PDF, 256 Kb, 修订版: A, 档案已发布: Sep 21, 2009
- Q2 2008 Issue Analog Applications JournalPDF, 1.3 Mb, 档案已发布: May 16, 2008
This document holds articles for specific application examples and technologies. It also includes a selection guide for antennas in low-power RF applications.
模型线
系列: BQ24314 (5)
- BQ24314DSGR BQ24314DSGRG4 BQ24314DSGT BQ24314DSJR BQ24314DSJT
制造商分类
- Semiconductors > Power Management > Battery Management Products > Battery Monitor, Protection & Authentication Solutions