Datasheet Texas Instruments BQ24650 — 数据表

制造商Texas Instruments
系列BQ24650
Datasheet Texas Instruments BQ24650

高效同步开关模式充电器控制器-太阳能电池充电器

数据表

bq24650 Synchronous Switch-Mode Battery Charge Controller for Solar Power With Maximum Power Point Tracking datasheet
PDF, 3.0 Mb, 修订版: A, 档案已发布: Apr 28, 2016
从文件中提取

价格

状态

BQ24650RVARBQ24650RVAT
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesNo

打包

BQ24650RVARBQ24650RVAT
N12
Pin1616
Package TypeRVARVA
Industry STD TermVQFNVQFN
JEDEC CodeS-PQFP-NS-PQFP-N
Package QTY3000250
CarrierLARGE T&RSMALL T&R
Device MarkingPASPAS
Width (mm)3.53.5
Length (mm)3.53.5
Thickness (mm).9.9
Pitch (mm).5.5
Max Height (mm)11
Mechanical Data下载下载

参数化

Parameters / ModelsBQ24650RVAR
BQ24650RVAR
BQ24650RVAT
BQ24650RVAT
Absolute Vin (safety rating)(Max)(, V3333
Battery Charge Voltage(Max), V2626
Battery Charge Voltage(Min), V2.12.1
Cell ChemistryLead Acid,Li-Ion/Li-Polymer,LiFePO4Lead Acid,Li-Ion/Li-Polymer,LiFePO4
Charge Current(Max), A1010
Control InterfaceStandalone (RC-Settable)Standalone (RC-Settable)
Control TopologySwitch-Mode BuckSwitch-Mode Buck
Number of Series Cells1,2,3,4,5,61,2,3,4,5,6
Operating Vin(Max), V2828
Operating Vin(Min), V55
Package GroupVQFNVQFN
Package Size: mm2:W x L, PKG16VQFN: 12 mm2: 3.5 x 3.5(VQFN)16VQFN: 12 mm2: 3.5 x 3.5(VQFN)
Special FeaturesProgrammable MPPT Setting,Solar Input,Standard BAT Temp Monitoring,Vin DPM (OK for Solar Power Source)Programmable MPPT Setting,Solar Input,Standard BAT Temp Monitoring,Vin DPM (OK for Solar Power Source)
USB FeatureN/AN/A

生态计划

BQ24650RVARBQ24650RVAT
RoHSCompliantCompliant

应用须知

  • Reducing Precharge Phase Region for bq24650
    PDF, 278 Kb, 档案已发布: Aug 30, 2011
    The bq24650 is a battery charger operates in three phases: precharge phase, fast-charge current regulation, and fast-charge voltage regulation. In many applications, a long precharge region is not required when using bq24650 as a charger. Thus, the following application note describes a method of reducing the precharge region for this charger. In this method, a circuit is designed to force the vol
  • Using the bq24650 to Charge a LiFePO4 battery
    PDF, 144 Kb, 档案已发布: Aug 24, 2010
    This application report gives an example of using the bq24650 charge management device to provide a high-efficiency, switching-mode charging solution for the LiFePO4 battery.
  • A Discrete Narrow Voltage DC/DC Charger Solution for Multicell Batteries
    PDF, 123 Kb, 档案已发布: Dec 12, 2011
    Solar charging applications typically require an input voltage regulation due to large variations in solar celllighting condition. Combining an NVDC (narrow voltage dc/dc) battery charging architectures with solar cell charging can extend battery life and run times by maintaining a very narrow voltage range for the system power. This application report shows how to do a NVDC charger solution wit
  • Maximum Power Point Tracking With the bq24650 Charger. (Rev. A)
    PDF, 474 Kb, 修订版: A, 档案已发布: Aug 15, 2011
    This application report describes a solution to track the maximum power point of a solar panel using a negative temperature coefficient (NTC) thermistor with the bq24650. The basic functionality of a solar panel is described. The use of a spreadsheet tool to aid in the setup process is described as well.
  • Preventing bq24650 Leakage Current When Using Shaded Solar Panels
    PDF, 2.3 Mb, 档案已发布: Sep 19, 2016
  • Using the bq24650 to Charge a Sealed, Lead-Acid Battery (Rev. A)
    PDF, 157 Kb, 修订版: A, 档案已发布: Oct 4, 2011
    This application report shows how to modify the bq24650 to charge a sealed, lead-acid battery from a solar panel. The circuit uses constant current (CC) charging to reach the bulk battery voltage and then switches to constant voltage (CV) charging until the termination current is reached. The modifications necessary to change the regulated voltage, recharge voltage and regulated current are discus
  • bq246xx Device Comparison
    PDF, 37 Kb, 档案已发布: Oct 8, 2010
    This application report presents an overview of the differences among the bq24600, bq24610, bq24616, bq24617, bq24620, bq24630, bq24640, and bq24650 battery charge devices. This document can assist design engineers with selecting the most suitable IC for their respective applications.
  • Bq241x0/3/4/5/8/9, bq24170/1/2, bq24133, bq24610/6 and bq24630/40/50 Comparison
    PDF, 59 Kb, 档案已发布: Aug 24, 2011
    This application report provides a comparison among bq241x0/3/4/5/8/9, bq24170/1/2, bq24133, and bq246xx . The document presents the main differences and describes the main features of each part. It assists designers in selecting the most suitable charger for their application.
  • Solar charging solution provides narrow-voltage DC/DC system bus for multicell
    PDF, 129 Kb, 档案已发布: Nov 9, 2011
  • A boost-topology battery charger powered from a solar panel
    PDF, 185 Kb, 档案已发布: Sep 16, 2011
  • A solar-powered buck/boost battery charger
    PDF, 334 Kb, 档案已发布: Apr 26, 2012
  • 2Q 2012 Issue Analog Applications Journal
    PDF, 2.4 Mb, 档案已发布: Apr 26, 2012
  • 4Q 2011 Issue Analog Applications Journal
    PDF, 943 Kb, 档案已发布: Nov 9, 2011
  • Журнал РїРѕ применению аналоговых компонентов 3Q 2011
    PDF, 3.9 Mb, 档案已发布: Sep 1, 2011
  • 3Q 2011 Issue Analog Applications Journal
    PDF, 1.4 Mb, 档案已发布: Sep 16, 2011

模型线

系列: BQ24650 (2)

制造商分类

  • Semiconductors> Power Management> Battery Management Products> Battery Charger IC