Datasheet Texas Instruments BQ7694003DBTR — 数据表
| 制造商 | Texas Instruments |
| 系列 | BQ76940 |
| 零件号 | BQ7694003DBTR |
9至15系列电池锂离子和磷酸锂电池监控器（bq76940系列）44-TSSOP -40至85
数据表
bq769x0 3-Series to 15-Series Cell Battery Monitor Family for Li-Ion and Phosphate Applications datasheet
PDF, 1.6 Mb, 修订版: G, 档案已发布: May 11, 2016
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 44 |
| Package Type | DBT |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2000 |
| Carrier | LARGE T&R |
| Device Marking | BQ7694003 |
| Width (mm) | 4.4 |
| Length (mm) | 11 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | 下载 |
参数化
| Communication Interface | I2C |
| Function | Monitoring (Analog Front-End) |
| Number of Series Cells | 9 Max |
| Package Group | TSSOP |
| Protection Feature | Over-current in Discharge (OCD),Over-voltage (OV),Short-circuit Discharge (SCD),Under-voltage (UV) s |
| Rating | Catalog |
| Special Features | Cell Balancing,Coulomb counter (integrating current sense),Integrated ADC,LDO,Low-Side NCH CHG/DSG FET Drive,Requires separate MCU,Temperature sense |
| Typical Operating Current(Typ) | 40 uA |
| Vin(Max) | 75 V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: BQ76940EVM
ВµC-Controlled AFE Family for 5/10/15-Series Cell Li-Ion and Phosphate Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- bq769x0 Family Top 10 Design Considerations (Rev. A)PDF, 559 Kb, 修订版: A, 档案已发布: May 2, 2016
- bq769x0 Pin Equivalent DiagramsPDF, 80 Kb, 档案已发布: Jan 5, 2015
This application note contains diagrams of the pin equivalent circuits for each of the pins in the bq76920, bq76930, and bq76940 devices. - I2C Communication Sample Code for the bq76940 with CRC Based on the MSP430 (Rev. B)PDF, 162 Kb, 修订版: B, 档案已发布: May 14, 2014
This application note describes how to communicate with the bq76940 family devices over I2C. The code is based on the TI MSP430G2553. The code shows how to write the CRC function which is used to verify the transaction integrity over the I2C and how to initialize the I2C engine of the G2553 and bq76940 registers as well as how to read binary data from the AFE registers and transfer the data to vol - bq769x0 boot switch alternativesPDF, 141 Kb, 档案已发布: Dec 21, 2015
The simplified system schematic in the bq769x0 data sheet shows a boot switch to wake the bq769x0 battery monitor. While this is a simple solution, in some cases this switch will not meet the needs of the system. This application report describes proposed circuit alternatives for the boot switch that may be considered for system design. - bq769x0 BMS Configurations for Cordless AppliancesPDF, 1.0 Mb, 档案已发布: Mar 23, 2017
- UART-Based Communication Protocol for Intermodule Communication of Light VehiclePDF, 572 Kb, 档案已发布: May 17, 2017
- Fault Monitoring for High-Availability Systems using the bq769x0PDF, 937 Kb, 档案已发布: Feb 3, 2017
The bq769x0 monitor family provides a complete solution of monitoring and protection for battery voltageand current related faults, but also protects the battery system by self-monitoring for internal hardwarefaults. There are high-availability applications, such as in a drone battery management system, where thisunexpected FET turn off is undesirable. In such applications, faults like XREAD - Embedded Scheduler in Cell Battery Monitor of the bq769x0PDF, 172 Kb, 档案已发布: Aug 10, 2016
模型线
系列: BQ76940 (10)
制造商分类
- Semiconductors > Power Management > Battery Management Products > Battery Monitor, Protection & Authentication Solutions