Datasheet Texas Instruments CC1190RGVR — 数据表
制造商 | Texas Instruments |
系列 | CC1190 |
零件号 | CC1190RGVR |
850-950MHz射频前端16-VQFN -40至85
数据表
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
打包
Pin | 16 |
Package Type | RGV |
Industry STD Term | VQFN |
JEDEC Code | S-PQFP-N |
Package QTY | 2500 |
Carrier | LARGE T&R |
Device Marking | CC1190 |
Width (mm) | 4 |
Length (mm) | 4 |
Thickness (mm) | .9 |
Pitch (mm) | .65 |
Max Height (mm) | 1 |
Mechanical Data | 下载 |
参数化
Frequency | 850,950 MHz |
Frequency(Max) | 950 MHz |
Frequency(Min) | 850 MHz |
Operating Temperature Range | -40 to 85 C |
Output Power | 27 dBm |
PA Efficiency | 50 % |
Package Group | VQFN |
RX Current (Lowest) | 3 mA |
RX Sensitivity | Typical 2 dB improvement dBm |
Sleep Current | 0.05 uA |
Technology | 6LoWPAN |
生态计划
RoHS | Compliant |
设计套件和评估模块
- Daughter Cards: CC1101CC1190EMK868
CC1101-CC1190 869 MHz Evaluation Module Kit
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: BOOSTXL-CC1120-90
BoosterPack for Sigfox Applications from 902MHz to 928MHz
Lifecycle Status: Active (Recommended for new designs) - Development Kits: CC-ANTENNA-DK2
Sub-1 GHz and 2.4 GHz Antenna Kit for LaunchPadВ™ and SensorTag
Lifecycle Status: Active (Recommended for new designs)
应用须知
- CC1190 Evaluation Module for 868 MHzPDF, 64 Kb, 档案已发布: Feb 18, 2015
The CC1190 is a range extender for 850-950 MHz RF transceivers, transmitters, and wireless microcontrollers (MCUs). It increases the link budget by providing a power amplifier (PA) for increased output power and a low-noise amplifier (LNA) with low noise figure for improved receiver sensitivity, in addition to switches and RF matching for simple design of high performance wireless systems. - AN112 -- Using CC1190 Front End With CC112x/CC120x Under EN 300 220 (Rev. C)PDF, 606 Kb, 修订版: C, 档案已发布: Jun 21, 2013
This application report outlines the expected performance when using a CC1120-CC1190 design underEN 300 220-1 V2.3.1 in the 869.4-869.65 MHz frequency sub-band (g3). The maximum allowed outputpower in the 869.4-869.65 MHz sub-band is +27 dBm (500 mW).For details on the regulatory limits in the 863-870 MHz SRD frequency bands, see the ETSI EN 300 220-1V2.3.1 and ERC recommendation 70-0 - CC1120-CC1190 BoosterPackPDF, 3.0 Mb, 档案已发布: Oct 5, 2015
As the module is designed to support both Launchpadв„ў and SmartRFв„ў Studio platforms, configure the board by changing the on-board jumper positions according to your application. The default configuration of the jumpers on the BoosterPackв„ў module is set for LaunchPad applications. The interface details of CC112x-CC1190 BoosterPack with LaunchPad and SmartRF Studio applications are - AN110 – Using CC1190 Front End with CC112x/CC120x under FCC 15.247 (Rev. B)PDF, 555 Kb, 修订版: B, 档案已发布: Jun 13, 2013
- Using CC1190 Front End With CC13xx Under EN300220PDF, 238 Kb, 档案已发布: Mar 9, 2017
- Using CC1190 Front End With CC13xx Under FCC 15.247PDF, 218 Kb, 档案已发布: Mar 9, 2017
- AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A)PDF, 563 Kb, 修订版: A, 档案已发布: May 2, 2011
- CC112x-CC1190 Boost Software ExamplesPDF, 55 Kb, 档案已发布: Oct 19, 2015
- DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A)PDF, 139 Kb, 修订版: A, 档案已发布: Nov 7, 2011
- AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220PDF, 371 Kb, 档案已发布: Jan 11, 2011
- DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)PDF, 685 Kb, 修订版: A, 档案已发布: Sep 14, 2010
- DN000 - Design Note Overview (Rev. T)PDF, 126 Kb, 修订版: T, 档案已发布: Oct 12, 2011
- DN031 -- CC-Antenna-DK Documentation and Antenna Measurements SummaryPDF, 2.3 Mb, 档案已发布: Aug 26, 2010
DN031 -- Design Notes - AN058 -- Antenna Selection Guide (Rev. B)PDF, 1.8 Mb, 修订版: B, 档案已发布: Oct 6, 2010
- DN035 -- Antenna Quick Guide (Rev. A)PDF, 138 Kb, 修订版: A, 档案已发布: Feb 12, 2013
模型线
系列: CC1190 (2)
- CC1190RGVR CC1190RGVT
制造商分类
- Semiconductors > Wireless Connectivity > Companion Wireless Solutions > Range Extenders